HI GUYS WELL I HAVE A 1996 BURB 2WD 5.7 :grinyes:
ALL THE WINDOWS WORK BUT JUST FROM
THE DRIVERS DOOR CHECK ALL THE FUSES THAY
ARE ALL FINE TOOK ALL THE SWITCHS OUT TO CHECK
PLUGS ALL IS GOOD SO I UNPLUGED THE PASSINGERS SWITCH
AND TRYED AGAIN FROM DRIVER DOOR AND IT DID NOT WORK
PLUG BACK IN AND IT WORKS AGIN BUT JUST FROM DRIVER DOOR
AND I UNPLUGED LOCK AND UNLOCK SWITCH IN THE DRIVER DOOR
JUST TO SEE IF THIS WILL WORK BUT NO IT DID NOT SO I AM AT LOST
SO CAN SOMEONE HERE HERE PLZ:banghead:

It sounds to me that possible be your lock out switch in the driver side door is not working. Have you by passed it? Or replaced it? Dave

i unpluged it and it still is not working

You need to bypass the lockout switch (paper clip between the two terminals). When it's just unpluged, it's the same as being in the lock position, the switch closes to allow the windows to work.

ok cool will try that and get back thanks guys :runaround: hope that works

WELL I BYPASS THE SWITCH AND IT WORKS THANK YOU GUYS :runaround: :runaround: