I got a 96 silverado and I need help on programing a keyless remote to my truck... If you can help please e-mail me at fiercemotorsports@yahoo.com...

Thanks JAMES

Locate the DLC (Data Link Connector) just under the drivers side dash.

Jumper pins 4 & 8 on the top row. (numbered 1-8 left to right).

The doors should respond with a lock and unlock. This indicates the module is in the program mode.

Within 1 minute press and hold the lock and unlock button on the remote. The doors should lock and unlock after about 10 secs.

You need to do all the remotes separately at this time.

Remove the jumper and test them.

hello

Most remotes can be programmed manually at home without any tools or technical skills.

If you need to just order the instructions please check our website at

http://www.carandtruckremotes.com/programming-instructions.html

If you have any more questions or have any specific inquiries about programming your vehicle please contact us at customercare@carandtruckremotes.com including year, make and model of your vehicle.

You can also view our FAQ page for answers to common questions. Link below
http://www.carandtruckremotes.com/faq.html


Best Regards

Customer Care
http://www.carandtruckremotes.com (http://www.carandtruckremotes.com/)
http://www.newkeylessremotes.com (http://www.newkeylessremotes.com/)
http://www.keylessentrystore.com (http://www.keylessentrystore.com/)