|
|
1996 T&C Trans problemFred D. 01-09-2008, 10:07 AM Hi, While driving at 65 I came to a stop the van felt like a manual trans still in gear. With my foot on the brakes the van jerked forward and killed the engine. It started up just fine but then a noise like there are a bunch of loose parts rattling around coming from the torque converter area when in drive. What could this be??????? I took it to the dealer they have not open it up yet. They tell me I could need trans at $2800. Is it worth trying to in stall a rebuild myself. Do I need special tools? Thanks in advance for your help, Fred webbch 01-09-2008, 11:58 AM I'm wondering if you have two problems - one are your tranny issues that I can't comment on. The other, possibly the reason the engine kept trying to go when you had your foot on the brake was due to a bad throttle position sensor. I would try to pull off the TPS and test it's operation. v8carreragts 01-10-2008, 01:02 AM A sticking converter clutch will do that. It acts just like you were stopping with a manual trans and didn't push in the clutch. Although it could be internal too. vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|