2000 S-10 High Beam Will Not Work

My driver side high beam will not work but my day running light works fine. I have changed the bulb twice and my pass high beam works fine. DOes anyone know what might be wrong or have had the same problem

not work at all or just dimly lit with hi-beams on? check usual suspects, power and ground to connectors and work your way back from there,

Not at all my brother inlaw and I have been looking thinking it might be a broken wire

ok, check for power to plug, and check the ground, you will have to work your way back from there, but sounds as if that is the culprit since other side works

With or without ZR2 light setup?

Most of them have a seperate fuse for right and left side.
Check all fuses first.
If fuse not blowed the g3et a good wiring diagram and a old 12 volt test light.
And trace the light circuits.
MT