Tamiya Semi-gloss Acrylic for Frames?
Camber
01-29-2003, 04:24 PM
Do I use the Tamiya Acrylic bottles of semi-gloss for window trim or will it bleed through? Or should i spray some Laquer Black and do it with a brush? Tanks
ales
01-29-2003, 04:40 PM
If you're planning to airbrush it - it will be fine, just use lower pressure and go over it several times.
If you're planning to paintbrush the X18 acrylic - more likely than not it will bleed under the maskin tape.
If you're planning to paintbrush the X18 acrylic - more likely than not it will bleed under the maskin tape.
Camber
01-29-2003, 04:44 PM
So your saying if i use tamiya acrylic with Tamiya Tape it WILL bleed? You made that sound to complicated.
ales
01-29-2003, 04:48 PM
It will bleed if you try to brushpaint it. If you airbrush it - it won't bleed. What's so complicated?
cph81
01-29-2003, 04:53 PM
Yes, the Acrylic paint might bleed alittle, but you can wash off the bleed paint right away. I always use acrylic paint for windows trim.
Camber
01-29-2003, 04:56 PM
Ales - That that is is that that is'nt is'nt... Don't get Coy..
Cph - B4 or after it dries?
Cph - B4 or after it dries?
ales
01-29-2003, 04:58 PM
Originally posted by Camber
Ales - That that is is that that is'nt is'nt... Don't get Coy..
:rolleyes:
Ales - That that is is that that is'nt is'nt... Don't get Coy..
:rolleyes:
Camber
01-29-2003, 04:59 PM
Originally posted by ales
:rolleyes:
I'm only bustin.. Thanks for the help.
:rolleyes:
I'm only bustin.. Thanks for the help.
cph81
01-29-2003, 04:59 PM
Just don't put it aside too long after dry. After you peel the tape off, wash them out with a cotton swab.
Automotive Network, Inc., Copyright ©2024