I'm working on my 93 probe as a project car and i've decided to replace the clutch in it to help me a little bit in the learning process and i was wondering if these were all i needed for the clutch kit inside of the transmission any help would be greatly appreciated

http://www.partsamerica.com/images/spaclear.gif Vehicle: http://www.partsamerica.com/images/spaclear.gif 1993 FORD PROBE GT http://www.partsamerica.com/images/spaclear.gif http://www.partsamerica.com/images/spaclear.gif Engine: http://www.partsamerica.com/images/spaclear.gif V6 2.5 Liter FI http://www.partsamerica.com/images/spaclear.gif http://www.partsamerica.com/images/spaclear.gif http://www.partsamerica.com/images/spaclear.gif New Clutch Set; Contains Clutch Disc, Cover Assembly, Release Bearing, Pilot Bearing / Bushing & Alignment Tool; Cover Type: Diaph.; 8 7/8x22x15/16
http://www.partsamerica.com/product_images/aap/pht/mu47745-1a.jpg

hello yes u should replace the parts u mentioned above good luck

thank you very much for the help

I would get the flywheel turned when you do the clutch. Some places do it free when you buy the parts from them.