I'm having some difficulty finding the right ignition wiring. I have diagrams, but it looks like it may have 99' wiring. Anyone have any tricks ?

I'm having some difficulty finding the right ignition wiring. I have diagrams, but it looks like it may have 99' wiring. Anyone have any tricks ?
Nope. That's an easy truck you should only have 3 wires there for ign. and acc.

ign1 = dark blue
ign2(only on 4.7 engine) = green/red
acc. = black/orange

That's what I thought, an easy vehicle, but I couldn't get a positive test for the Ign. & Acc. Every wire diagram I found is different. And the Ign. don't all test as Ign. Been a while since I've remote starts, but damn!

Not sure what info you are using but I know some companies were also using the Durango as wiring info but those are indeed different.

Well, I might have issues w/ the unit.

What is it that you are trying to install?

OMG, don't believe someone just asked that. Did you read the topic of this posting?

OMG, don't believe someone just asked that. Did you read the topic of this posting?
Smartass the "it" I was referring to was the brand/model of remote start. Read my posts and you'll see that I understood what he's trying to install.

I don't have it in front of me, but it's a Directed electronics remote start, no locks. It was bought at Autozone, so who knows! Normally, I wouldn't do anything I'm not use to, but it's a favor.

It's a Ready Remote 24926, (dei). I'm going through everything again.
It's very possible I have something wrong. I thought the 2nd Ign. was green/red, but it doesn't test as ign. I know the acc is right, I jumped 12v to it and the heater powered up.

Just take your time and double check everything. Remember, you can go to www.bulldogsecurity.com to look up the vehicle's information. Also, those remote starters DO suck. I use to carry them in my shop for the DIY'r but I had horrible luck with them.

Sorry, Poncho. I couldnt resist. I am actually looking at installing a remote start myself next summer.

No problem.