ITR progress pics(modified)

My Integra Type R's Paint was stripped and it will be puttied then primed. I my integra is gonna look like this? Any ideas how to make a Sunroof? Also, Does anyone Have Rear, headlights, and corner lights that they would send/sell to me? I will be willing to trade you for sets of Rims that are left over... PM me if ur interested.... Heres what i want it to look like below!!


http://files.automotiveforums.com/uploads/564937015.jpg

http://files.automotiveforums.com/uploads/383336016.jpg

ill have to go try to dig some up but what kind of rims are you talking about

Both kinds of ITR rims

I've seen at least 20 threads from you all about one car. Why not just put all of your questions into one thread, and if you come up with some later, post them in the same thread so that the board doesn't get cluttered with so many threads that can be put all into one. :smoker2:

Integra14, you sren't gonna put fual exaust are you???

That should be pretty easy, all you have to do is make side skirts and a rear valance, It should look very nice.

Kicker, where have you been, I hav'nt seen you on for a while, Or are you always on the forum but I don't see you?:) Are you still up for the competition?:finger:

Originally posted by integra818
Integra14, you sren't gonna put fual exaust are you???


revised:You aren't gonna but dual exaust are you???

I made a mistake:finger:

Originally posted by integra818

revised:You aren't gonna but dual exaust are you???

I made a mistake:finger: use the fuckin' edit button, not the quote button! :rolleyes:

Originally posted by integra818

revised:You aren't gonna but dual exaust are you???

I made a mistake:finger:

ahh, thats exhaust...:finger:...and put....:finger:. And theres two dual exhausts... :rolleyes:

It shouldn't be too hard to make that car.

I know, i picked it because it didn't require that much styrene/putty because i am just learning how to do that... and i will probably make the dual exhausts..... The only thing that will b different willb the COLOR

u think these rims would be cool for Integra, Does anyone know waht size they are?:confused:

Originally posted by kicker1_solo
use the fuckin' edit button, not the quote button! :rolleyes:
calm down there its not that big of a deal:finger4: :finger4: :finger4: :finger4: :finger4: :finger4:

Alright... I just bought some styrene and putty FINALLY! so the progress should be a lot faster!!! keep ya posted:licker:

calm down there its not that big of a deal

You guys are :argue: and I am :hehehe: :hehehe: :hehehe:

Those rims are only about 17". They will not fill up the wheel wells..

alright.... also.. For Styrene- FOTW, how do you get the curves of the bumper?? do u divide the bumper into 3 pieces, then just bend it with your hands, or can u heat it up???

cant wait to see the final product

Hey.. putty and styrene is really hard to do, so i came up with someting on my own... THe pic is of the front bumper, but i havent started to sand yet rreally,.. so its copmletly bumpy

Ps... my puttty sucks.

hey everyone whos reading... I was just wondering if Anyone had any Front headlight clear plastic pieces that they were'nt using, because i need some!!!

more progress pics

I'm suck in those putty job too....:(

but we got 4 months tho.....:)

good luck man....

also good luck to me too....:D

The front lip spoiler can be made with three pieces of plastic sheet, front, right and left pieces. Then, the corner can be filled with putty. Otherwise, it'd be really hard to make the brake inlet openings. The side skirt and rear bumper valance can also be made from plastic sheet, and use putty to fill curved areas.
For the headlights, MV lens might look better, because it has the appearance of bare projector light. MV lens can be found at railroad model stores.

ive been using this putty, and i've come to the conclusion , that it is not very good... I don't know.. maybe im not using it correctly... its called Squadron White putty

[channel kicker1solo]kicker uses the same exact putty, and he likes it. He says that it goes on so much smoother and cleaner than any other putty he's ever used.[/channel kicker1solo]

In the pictures you posted, the front end is pretty much the same as the ITR with the custom lip, you could of just left it.

And building from scratch is pretty hard, it is easier to work off something as a frame (like the front end that comes in the kit).

yea...... it doesn't look like the stock itr lip.. ill take some more pictures.... this is what happens
1. I cut styrene, make a frame for the kit.
2. Try to put putty over it, and try to make it even
3. after putting it on, then sanding, i always get little holes all over the place

HELP!

You need two-part epoxy putty, not filler Squadron putty that you've been using. The stuff you're using is too crumbly and not strong enough on it's own to be used as putty.

yes exactly... My brother had to repair one of his friends cars with putty. Would that work for models...

Car Putty/filler or somethin

:alien2: yea, Bondo is a good filler putty to use, then u can go bcakk and use the squadron putty for the rest:alien2:

o aight.. ill have to get my brother to drive me to some auto store.. .. so what should i do with the integra now???

Hey integra 14, where are u frum and what nationality are u

why do u wanna know that? thats a little irrevulant