Our Community is 940,000 Strong. Join Us.


4wheel hi won't engage


les16
11-26-2002, 08:13 AM
I have a 01 S-10 Crew Cab, can shift to 4 wheel low ok.. but when you try to go to 4 wheel hi the light doesnt light and it stays in 2 wheel hi, the light on 4 wheel hi will flash when in netural and shifting to 4 wheel low. when shifting from 4 wheel low back to 4 wheel hi it goes right back to 2 wheel hi.....this is v6 with auto trans. and dash mounted electric shift. 29.000 miles. has not been used Off-Road or Mud ETC. hiway driven only.. the 4 wheel hi has worked in the past I checked the fuse it was ok, not sure if the 4wheel hi is Engaged in the transfer case or just the front diff, is locked by a solenoid (there is a sol. in the front Diff.) Qwner manual has very little info on 4 wheel drive. TY

BOWTIE
12-01-2002, 08:09 PM
HEARD ABOUT THIS FROM A FEW DIFFERENT PEOPLE, ON A COUPLE OF THEM IT WAS THE ACTUAL DASH SWITCH, ALOT OF THE FULL SIZE TRUCKS AND SUBURBANS HAVE THE SAME PROB....HOPE THIS HELPS

custmguru
01-15-2003, 01:57 PM
are you sure its just not the light that went out? ive seen that a lot

Add your comment to this topic!