wheel chatter

i put a stage 2 clutchmaster in my srt and its been been through enough miles to be broken in... but i still have that fucking wheel chatter!iam thinking it just wasnt intalled correctly? anyone got any ideas?

What do you mean chatter? Whilst driving or idle or what?

well at a stop and and barly taking of letting clutch out at 1100 rpm or soo the car front end kinda shakes and feels like the tires are not catching grip....

You sure it's not a motor mount?

no cuz it does more and more the motor gets hot! when i first turn on the car and the tranny and motor are cold it runs perfect! but when i start driving for more then lets say 20 minutes it will start the wheel chatter! i tend to hav to kinda over rev to get it moving from stop position... if i over rev to atleast 2000 rpms and let go clutch it wont chatter but 1300 or les it will!

neons are hard on the motor mounts and lower control arm bushings i replace them daily. hey by the way wheres the nos???????????? check the upper and lower motor mounts make sure they are not torn or ripped

You replace your bushings and motor mounts daily? Sounds kind of a far fetched if you ask me...but either way...there is some truth in your statement...srt4's/neons are hard on their mm's and lca bushings.

Please explain more about this clutch/tranny issue. Who did the work? Does it grind or have trouble getting into any gear? Any clutch pedal vibrations? How loud is it...you sure it's not the tb or tb fork?

its not far fetched when you get about 8 neons in the shop everyday they are a very comon problem srt4 or not it is just bad designing

did the flywheel get resurfaced or was it just cleaned up

yes there is pedal vibration when its in every gear! but when its outa gfear its fine... wat could cause that??

it was done bye a tranny shop where i live! been going there for years...


ill check the mm mounts..

Possible clutch fork

is any site i could go to see or read about clutch fork??

I'll pm you the info tomrrow...

I'm sorry I ment tob fork...Pm'd info...