98 Integra Headlights full of Condensation
kwik46
10-29-2002, 03:58 PM
HELP!!
My 98 Integra GSR with the stock projector beam headlights has condensation behind the outer covers. This is only a problem on the driver's side but both the high beam and the low beam are affected.
Has anybody had any issues with this before?
What can I do to prevent this from happening once I get them dried out again?
Thanks!
My 98 Integra GSR with the stock projector beam headlights has condensation behind the outer covers. This is only a problem on the driver's side but both the high beam and the low beam are affected.
Has anybody had any issues with this before?
What can I do to prevent this from happening once I get them dried out again?
Thanks!
TheBum
10-30-2002, 06:27 PM
I had this problem with my integra. Lucky for me, it was the dealers fault :bandit: ....
But, what you can do if your willing is take out the entire casings and seal up every single place where two pieces connect with caulking. Its tedious, but it worked on my friends civic.
And dont seal the part where theres a little rubber hose coming out (about 1 inch long). That is to let condensation out or something.... Im not quite sure
But, what you can do if your willing is take out the entire casings and seal up every single place where two pieces connect with caulking. Its tedious, but it worked on my friends civic.
And dont seal the part where theres a little rubber hose coming out (about 1 inch long). That is to let condensation out or something.... Im not quite sure
Automotive Network, Inc., Copyright ©2024