1995 firebird bra


segrandam
05-05-2007, 01:42 PM
wanting to buy a bra for the car but wondering
about the license plate bracket on front of car
how would i get it back on do they come with holes
for license plates or would i just have to poke
holes in the bra??
thanks for the help

CamarosRsweet94
05-05-2007, 01:54 PM
I wouldn't put a bra on the car unless it is already damaged, a bra will scratch the crap out of the paint and will cause the paint to fade unevenly and look horrible.

poormillionaire2
05-05-2007, 03:15 PM
I wouldn't put a bra on the car unless it is already damaged, a bra will scratch the crap out of the paint and will cause the paint to fade unevenly and look horrible.

I agree. Plus, a bra in a humid area is bad because it traps moisture and cause metal surfaces to rust. But 4th gen f-bodies don't have much area in the front area to rust. Just thought I should throw that out there.

blindeyed
05-05-2007, 03:27 PM
To answer your question.. yes they have an area for the bracket to go, but you need to take the bracket off the bumper, and do as you just said, poke holes through the bra and screw it back it.

Here's what it looks like up close:
http://www.blindeyed.com/car/645571.jpg


Make sure you only buy the one made by LeBra.. all the other ones look horrible compared to it.

Moving this to Appearance.. Please use the sub-forums.

segrandam
05-06-2007, 02:44 PM
thanks blindxeyed for actually answering the question
i asked... i think they look great on a bird.. plus most of
them have the normal hairline cracks:banghead: which suck
thats the main reason i want 1 on the car
thanks again.. you have a nice bird.:grinyes:

Chevy7x
05-18-2007, 05:33 PM
its true that they can cause paint problems but they are a good idea for during the winter so that road salt dosnt get throw at your car and if you ditch it, the bra might help some

Add your comment to this topic!