00 si b16a2 into a 98 honda civic dx wiring probl
jcivic
10-18-2002, 07:09 PM
ok,igot a 00si ecu ,and a 98dx (vtec wired already)harness.2 plugs fit but the middle plug does not fit.does anybody knows how i can wie this up?
shepworldwide
10-25-2002, 07:03 AM
i don't have the awenser for you but this might help....
let me know if it works out!http://www.geocities.com/MotorCity/Garage/4311/tech.html
let me know if it works out!http://www.geocities.com/MotorCity/Garage/4311/tech.html
jcivic
10-29-2002, 09:35 PM
:( come on guys any help outthere?
shepworldwide
10-30-2002, 06:21 AM
if you had a helms or even a hayes book this thread would not exist..
but it does, so i say buy a book... it's a must when doing a swap
but it does, so i say buy a book... it's a must when doing a swap
jcivic
10-30-2002, 11:27 AM
:mad: i got a helms, a book is not the problem, is the middle harness plug that doesn't fit is.
shepworldwide
10-30-2002, 12:09 PM
Originally posted by jcivic
:mad: i got a helms, a book is not the problem, is the middle harness plug that doesn't fit is.
sorry bout that!
i'm a jackass did'nt read ur first post correctly :donkey:
:mad: i got a helms, a book is not the problem, is the middle harness plug that doesn't fit is.
sorry bout that!
i'm a jackass did'nt read ur first post correctly :donkey:
shepworldwide
10-30-2002, 12:17 PM
http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=Civic&catcgry2=1999&catcgry3=2DR+SI&catcgry4=KA5MT&catcgry5=ENGINE+WIRE+HARNESS
i dont know if this will help, but could buy proper connector and re-pin it...
i dont know if this will help, but could buy proper connector and re-pin it...
jcivic
10-30-2002, 11:18 PM
:flash: can somebody tell me the part # or exact description of the middle plug that goes into the ecu.
DblOvrhedCamron
10-31-2002, 11:38 PM
Originally posted by jcivic
ok,igot a 00si ecu ,and a 98dx (vtec wired already)harness.2 plugs fit but the middle plug does not fit.does anybody knows how i can wie this up?
did you pull the Main wiring harness connector(big green plug near ecu)
2nd Main wiring harness connector(under hood, left strut tower) do you have NGK plugs???? did you zig zag or line em up??????
ok,igot a 00si ecu ,and a 98dx (vtec wired already)harness.2 plugs fit but the middle plug does not fit.does anybody knows how i can wie this up?
did you pull the Main wiring harness connector(big green plug near ecu)
2nd Main wiring harness connector(under hood, left strut tower) do you have NGK plugs???? did you zig zag or line em up??????
jcivic
10-31-2002, 11:44 PM
:( i got the whole harness out the two connector on the left and rigth fit but the middle one does not it's a little to big ,and it looks like it has diffrent amount of pins.
hybridsol
11-01-2002, 12:39 AM
Originally posted by jcivic
:( i got the whole harness out the two connector on the left and rigth fit but the middle one does not it's a little to big ,and it looks like it has diffrent amount of pins.
alright man it sounds like your looking fro a jumper conversion.
96-98/OBD2-->99-01/OBD2 ECU Jumper go to this site-
http://jdmhondaparts.com/frameset-ecu.htm - hope i could be of some asistance. :)
:( i got the whole harness out the two connector on the left and rigth fit but the middle one does not it's a little to big ,and it looks like it has diffrent amount of pins.
alright man it sounds like your looking fro a jumper conversion.
96-98/OBD2-->99-01/OBD2 ECU Jumper go to this site-
http://jdmhondaparts.com/frameset-ecu.htm - hope i could be of some asistance. :)
Automotive Network, Inc., Copyright ©2024