http://www.autozone.com/shopping/repairLanding.htm;jsessionid=2B022F0D644EA76680D02 956D53D337B

Go to this page, enter which motor you have, and then select the subsection you need...lots of good step by step info and diagrams, thanks to AutoZone for providing it free...

They don't have a section specifically for 1996-2001, but you can find that info by entering a similar GM model....

I have a 95 lumina in which it has the 3.1. It supposedly had ( has ) anti-lock brakes but the guy I had bought it from said he disable them. The problem I am having is this : A couple of months ago it lost a lower ball joint anad CV axle ( which were replaced ). The shop mentioned that the brakes rotors needed to be replaced ( the car sits 90% of time ). Now that it has warmed enough to check Ive noticed the brake fluid leaks out but I can not see where it is going. The brake pedal goes right to the floor. I have looked at the procedure on how to bleed the brakes but feel kind of lost as the where the fluid is going seeing it was the drivers side axle that had the problem ( the wheel turned 90 degrees and dropped ). Any ideas or sugestions would be great. Thanks

My car is Chevy Lumina 91 and I got the trouble with the Speedometer so far. It's working intermittently. Especially, after starting, it works a while then the pointer vibrated toward the 0 and dead.

Anybody has any idea and can help me out. Really appriciate that.

Thanks

Can anyone tell me how to replace a ignition control module on my 1990 lumina coupe? Any and all help will be greatly appreciated.

Welcome to AF, in the future look at the dates on threads this is too old, and your question is unrelated. Anyway check autozone.com, repair guides.