Our Community is 940,000 Strong. Join Us.


md22 and other question


PlayStation3
03-23-2007, 04:56 PM
ok i have a chance to get a us amps merlin md 22 for 325 and i think i am going to get it. now i only need 110 rms and that amp is rated any where from 165-200 rms now if i remeber correctly i should look for 29.664 on my dmm with all the eq and xovers set to 0.

also a low pass filter is the filter that cuts off below what you sent it at right.

pimprolla112
03-24-2007, 12:30 AM
Low pass is for low cutting out high frequency for subs, high pass is for cutting out low frequency and the off is well so the speaker will pick up all frequencies.

As for the power to the DMM, i got 219 watts with the equation, unless your going to run it at 8 ohms. So for 110rms you would need just under 21 volts.

Add your comment to this topic!