Hi everyone,
I have a problem, I pulled A trailer out of some weeds /bushes with a chain
for about 20'. After I stopped The motor shut down and now won't start.
It doesn't seem to have any power to the fuel sending unit or the fuel pump
I can't find any wires loose at the fuel pump, but it has 178000 miles so I changed it anyway . I did find the wires pulled out of the oxy. sensor on the cat.but the wireing harness seems to be ok.I put in new relays & checked all the fuses I could find in the kick plate & under The hood. I got A complete sevice manual from jeep for My model which may take a year to understand what the problem could be. I have some machanical ability rebuildt a few motors, changed clutches, trans,brake jobs on My own stuff I have 11 cars / trucks. but MY 98 JGC is the Baby girl of the bunch. Any ideas what could be wrong ?,can the PCM go out like that ? I think oxy. sensor wires have been off for a long time cause the cel has been on for some time.My son has been driving it for the last 2 years, but it was running great until this happened.
Thanks,
marktruck

check the fuel pump fuses/relays, then make sure that none of the wiring harnesses to the fuel pump/sending unit caught something and disconnected. does the engine crank over when you turn the key, or does it just sit there and mock you silently?

(check the fuel pump fuses/relays, then make sure that none of the wiring harnesses to the fuel pump/sending unit caught something and disconnected. does the engine crank over when you turn the key, or does it just sit there and mock you silently?)

It turns over good & checked all that, I think We figgerd it out (see my post about installing a PCM.
Thanks,
marktruck