2001 Tahoe 2 Problems
K3CLT
02-10-2007, 07:03 PM
I have 2 problems.
1. The rear wiper stops working. You can hear the motor running but no blade action. 5-10 minutes later is will work again.
2. Can the bulbs for the power window switches be replaced?
:nono:Pass on a tip also. My cruise quit working. Checked everything fuses, switches, but still didn't work. I checked the brake light bulbs and found that both were burnt out. Replaced them and the cruise worked again.:rolleyes:
1. The rear wiper stops working. You can hear the motor running but no blade action. 5-10 minutes later is will work again.
2. Can the bulbs for the power window switches be replaced?
:nono:Pass on a tip also. My cruise quit working. Checked everything fuses, switches, but still didn't work. I checked the brake light bulbs and found that both were burnt out. Replaced them and the cruise worked again.:rolleyes:
GMMerlin
02-11-2007, 05:47 AM
I have 2 problems.
1. The rear wiper stops working. You can hear the motor running but no blade action. 5-10 minutes later is will work again.
2. Can the bulbs for the power window switches be replaced?
:nono:Pass on a tip also. My cruise quit working. Checked everything fuses, switches, but still didn't work. I checked the brake light bulbs and found that both were burnt out. Replaced them and the cruise worked again.:rolleyes:
Sounds like the gear that attaches the motor to the wiper might be stripped.
The bulbs in the switches are LEDs, you can replace them if you want to disassembele the switch and desolder the bulb
1. The rear wiper stops working. You can hear the motor running but no blade action. 5-10 minutes later is will work again.
2. Can the bulbs for the power window switches be replaced?
:nono:Pass on a tip also. My cruise quit working. Checked everything fuses, switches, but still didn't work. I checked the brake light bulbs and found that both were burnt out. Replaced them and the cruise worked again.:rolleyes:
Sounds like the gear that attaches the motor to the wiper might be stripped.
The bulbs in the switches are LEDs, you can replace them if you want to disassembele the switch and desolder the bulb
Automotive Network, Inc., Copyright ©2026
