my temp and oil preasure gauge light is out how hard is it to get in there and change it. 98 ws6 and while i'm in there should i go ahead and replace them all.

I just did my 97 Camaro. It was not to bad. I had to pull off the kick plate below the steering column, drop the steering column a bit then remove the bezel around the instrument cluster. It took about 30 minutes since I did not know exactly what I was doing. I replaced all of the bulbs since I was in there, it was not that much for them. I hope this helps with you WS6.

yeah, its not that hard but be careful not to scratch the plastic. mine got scratched a couple times..

btw, if you want you can change the bulb colors too ;D