I am buying a new general motors keyless entry on Ebay for my 2003 Malibu and wanted to know if anyone knows if it can be programmed without going to the dealer.

Also I noticed many postings about low coolant lights appearing on others' Malibus. I have the same problem with the ligth turning on and off even after putting coolant in. Any suggestions?

Hopefully you got the right remote, but heres the instructions for 01 and newer...

1) Sit in the driver's seat

2) Remove the ignition key from the ignition lock cylinder

3) Close all the doors

4) Press and hold unlock on the door lock switch (on the door)

5) While holding the door lock switch in the unlock position, insert and remove the

ignition key twice. DO NOT ROTATE THE KEY.. JUST SLIDE IT IN AND BACK

OUT.

6) Insert the ignition key the third time, leaving the key in the ignition cylinder. DO NOT TURN KEY

7) Release the door lock switch. You will hear 3 chimes indicating the transmitter

programming is active.

8) Press and hold the lock and unlock buttons on the keyless entry remote at the

same time (one remote) for 12 seconds. You will hear two chimes. This indicates the

transmitter has been programmed.

9) Repeat step 8 for all additional transmitters to be programmed

10) Exit programming by removing the key from the ignition cylinder

That Didn't Work~

What part number remote are you trying to use Jocelyn1225?