1999 jimmy fuel pump wiring
chevyolds
11-14-2006, 09:20 PM
I am hoping some one out there will know what all the wires are to the fuel pump. really only the ground. i want to run a new ground but i am not sure which one it is
any help would be great.
any help would be great.
twistedtech
11-15-2006, 05:03 PM
I dont run a new wire I simply run a a ground from the corner of the tank to the frame.
wirenut699
11-15-2006, 08:06 PM
I checked my diagrams for my 1999 blazer.
According to those diagrams the fuel pump has 4 wires: two for the pump and two for the level sending unit (float).
The vapor pressure sensor is three wires: Black/white, grey, dark green
The pump wires are grey(B) and black(C) -the black is the ground. On pickup trucks it grounds to the frame nearby. On SUV's it travels back to the leftside dashboard to a test point and then back to a leftrear crossmember. Seems crazy but I guess if you find the test point under the dash, you can test to see if there is a bad fuel pump ground.
The float is purple(A) and black(D) -this black is not ground. Be careful not to mix the two blacks up.
According to those diagrams the fuel pump has 4 wires: two for the pump and two for the level sending unit (float).
The vapor pressure sensor is three wires: Black/white, grey, dark green
The pump wires are grey(B) and black(C) -the black is the ground. On pickup trucks it grounds to the frame nearby. On SUV's it travels back to the leftside dashboard to a test point and then back to a leftrear crossmember. Seems crazy but I guess if you find the test point under the dash, you can test to see if there is a bad fuel pump ground.
The float is purple(A) and black(D) -this black is not ground. Be careful not to mix the two blacks up.
wirenut699
11-17-2006, 04:58 PM
NOTE: the colors I gave previously are for the 4.3 engine. The colors are different if it's the smaller engine.
Automotive Network, Inc., Copyright ©2024