can any one tel me i have a comptech s/c on my s2000 .oil seems to seep out of the intake side,QUITE A BIT I MIGHT ADD . what is the engine oil pressure and the s/c oil pressure . are they the same ,maybe i need a oil pressure regulator between the two. is there a seal kit . any ideas . thanks :banghead:

e maIL ME OR POST IT 27829457858@VODAMAIL.CO.ZA

what size feed line are you using? I know that on my turbo i have to run a -3an line w/o a restrictor (55psi) and that's just fine. One thing i would recommend is checking the return line to the pan. If it is kinked or loops back up away from the ground, its a bad line. It needs to drain down and into the pan. I had that problem with my turbo for a while, but then i fixed it....