|
|
gen 1 monty hitch??galaxie500 08-23-2006, 11:43 AM i've been trying to track down a full size 2" hitch for my 91, and absolutely everywhere that does aftermarket only selld the 1 1/4 class 2--but i've seen these old monty's with the full size receiver that mounts to the rear center towplate--any sources out there? off-roader 08-24-2006, 12:35 PM i've been trying to track down a full size 2" hitch for my 91, and absolutely everywhere that does aftermarket only selld the 1 1/4 class 2--but i've seen these old monty's with the full size receiver that mounts to the rear center towplate--any sources out there? 4crawler.com makes a low profile one that's a 2" receiver size but is probably not strong enough to be rated as a class II much less class III capacity hitch. So at best you can to use it to pull light loads. You can sometimes find a used full class III rated hitch that was manufactured for and sold by John Baker. A 3rd party made them for him and he sold them through his website but he doesn't carry them any longer. Last but not least I'm sure that U-Haul will have some kind of hitch that can be used with a Mitsu however it won't be designed specifically to use the OE holes that are already there. HTH. vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|