Passport Timing Belt

I replaced the timing belt on my 96 Passport 150K miles. The engine cranks over but will not fire. I was never 100% comfortable with the timing marks lining up but I don't think any of the sprockets moved when I changed the belt. I turned the engine over with a socket wrench a number of times before I put it back together and did not feel any interference. If the timing was off a tooth or two would it not fire at all? Any other suggestions before I tear back into it would be very helpful? I also replaced the a/c compressor but I doubt that has anything to do with this problem
96 Honda Passport
3.2L V6
AT, 4WD

If you are getting fuel and spark, then your valve timing is off. Something must have moved when the T-belt was removed. You can do a compression test to check for proper valve timing. You will be all over the place if the V-timing is off.

G/luck
Joel