Current Project --- BMW 320i
zetaet
08-11-2002, 10:08 AM
My new project... BMW 320i 4 dr sedan. It's a Hagasawa kit. Managed to find it when I was marketing for grocery... Always been my favourite car...
As usual, don't expect much details, even the steering wheel is skewed to the right. It doesnt lie in front of the driver!! Came with pram wheels, so a new set of wheels will be used. I used 18' OZ Grand Tourismo for this.
It is gonna be in black. (again), with slight modification, the wheels and perhaps double exhaust. Raised the rear end by 2mm to accomodate the new wheels.
The pic shows what I have done so far... will post more pics soon.
Started on my R32. Will post some pics soon as well.. ;)
http://files.automotiveforums.com/uploads/828334DSCF0027_2.JPG
Body primed and ready to be painted.
http://files.automotiveforums.com/uploads/527802DSCF0095_2.JPG
The finished interior. Came with brown carpet... painted it black to match the german grey interior.
http://files.automotiveforums.com/uploads/544952DSCF0096_2.JPG
The chassis of the car. Left the steering component unpainted for now. The exhaust has not been modified yet. As usual red coils for me.
http://files.automotiveforums.com/uploads/335667DSCF0097_2.JPG
I will be using these disc for the car. It's a 18' Brembo.
As usual, don't expect much details, even the steering wheel is skewed to the right. It doesnt lie in front of the driver!! Came with pram wheels, so a new set of wheels will be used. I used 18' OZ Grand Tourismo for this.
It is gonna be in black. (again), with slight modification, the wheels and perhaps double exhaust. Raised the rear end by 2mm to accomodate the new wheels.
The pic shows what I have done so far... will post more pics soon.
Started on my R32. Will post some pics soon as well.. ;)
http://files.automotiveforums.com/uploads/828334DSCF0027_2.JPG
Body primed and ready to be painted.
http://files.automotiveforums.com/uploads/527802DSCF0095_2.JPG
The finished interior. Came with brown carpet... painted it black to match the german grey interior.
http://files.automotiveforums.com/uploads/544952DSCF0096_2.JPG
The chassis of the car. Left the steering component unpainted for now. The exhaust has not been modified yet. As usual red coils for me.
http://files.automotiveforums.com/uploads/335667DSCF0097_2.JPG
I will be using these disc for the car. It's a 18' Brembo.
fullbloodchop01
08-11-2002, 10:29 AM
:flash: lookin good so far. it should look good in black:flash: , are u gonna paint the interior black 2:confused:
Gainsbourg
08-11-2002, 10:54 AM
Looking good. Nice detailed body by Hasegawa.
flyonthewall
08-11-2002, 12:32 PM
Should be good!
Midnight Racer
08-11-2002, 12:36 PM
A black BMW with 18" chrome wheels.What more can you ask for.Great choice on the colour and rims.:D
primera man
08-11-2002, 05:20 PM
Originally posted by zetaet
Raised the rear end by 2mm to accomodate the new wheels.
You raised it :eek: :eek:
Lower it and tuck those wheels "just" into the guards. With those big rims it will look great !!
:) :)
Raised the rear end by 2mm to accomodate the new wheels.
You raised it :eek: :eek:
Lower it and tuck those wheels "just" into the guards. With those big rims it will look great !!
:) :)
Honoturtle
08-11-2002, 05:59 PM
This might sound stupid but, what do u guys mean by "pram" wheels?
zetaet
08-11-2002, 08:24 PM
Originally posted by primera man
You raised it :eek: :eek:
Lower it and tuck those wheels "just" into the guards. With those big rims it will look great !!
:) :)
Heheh... it's a personal thing... if I stick the wheels "just" into the guards, I will end up with a slightly "slammed" look, and I m not a fan of slamming.... ;) I prefer a normal looking car, and I have to agree that the car is sitting pretty high now.
Umm... what do I mean by pram wheels... perhaps the pic will tell a thousand words.
http://files.automotiveforums.com/uploads/413775DSCF0100_2.JPG
The wheel on the left is the stock ones.. it's only about 60% as wide as the new ones. If you fit it on... it sucks!!
http://files.automotiveforums.com/uploads/396035DSCF0101_2.JPG
Again, left one is the stock... It's just not in scale... it says 225/16R... doesnt feel like 225 wide and 16' at all!
That's the idea of pram wheels.. :p Keep the comments coming... :)
You raised it :eek: :eek:
Lower it and tuck those wheels "just" into the guards. With those big rims it will look great !!
:) :)
Heheh... it's a personal thing... if I stick the wheels "just" into the guards, I will end up with a slightly "slammed" look, and I m not a fan of slamming.... ;) I prefer a normal looking car, and I have to agree that the car is sitting pretty high now.
Umm... what do I mean by pram wheels... perhaps the pic will tell a thousand words.
http://files.automotiveforums.com/uploads/413775DSCF0100_2.JPG
The wheel on the left is the stock ones.. it's only about 60% as wide as the new ones. If you fit it on... it sucks!!
http://files.automotiveforums.com/uploads/396035DSCF0101_2.JPG
Again, left one is the stock... It's just not in scale... it says 225/16R... doesnt feel like 225 wide and 16' at all!
That's the idea of pram wheels.. :p Keep the comments coming... :)
Hash_man
08-11-2002, 08:45 PM
Looks like a fun project.... post more pics with the progress
GTI1800
08-13-2002, 07:39 PM
Hi,
i can't wait to see finished car........
Really good beguining.....
Laurent
i can't wait to see finished car........
Really good beguining.....
Laurent
Honoturtle
08-13-2002, 07:50 PM
O thanxs for explaining.
zetaet
08-25-2002, 09:14 PM
Hi guys... finally got some time off my thesis to work on my models... screwed up on this body and the R32's... Managed to strip the paint off both and finished this one.
I have 2 coats of primer and 4 coats of TS-14 on it. Not a very good kit as I have problems fitting the chassis to the body... Think this kit has the same mold as the Dragon kit... same problem.
It's about 80% done... I haven't decide which wheels to use... care to help me decide??? hehe.. Thanks for the time.
http://files.automotiveforums.com/uploads/247349DSCF0210_2.JPG
http://files.automotiveforums.com/uploads/334858DSCF0211_2.JPG
Shots of the completed body...
http://files.automotiveforums.com/uploads/414843DSCF0237_2.JPG
Shot of the front end... I used 18' Brembo disc on this one.
http://files.automotiveforums.com/uploads/489067DSCF0233_2.JPG
Shot of the rear... sorry abt the quality... i wanted to have double exhaust tips for this... but I figured out I have to replace the whole muffler... so I opted for a Oval tip.. used BMF on it.
http://files.automotiveforums.com/uploads/536236DSCF0239.JPG
(Frm Left) OZ gran tourismo from Aoshima, OZ gran tourismo from Fujimi, BBS LM from Aoshima... which is better??
http://files.automotiveforums.com/uploads/268380DSCF0240.JPG
http://files.automotiveforums.com/uploads/902120DSCF0241.JPG
http://files.automotiveforums.com/uploads/695930DSCF0242.JPG
Can anyone comment... which rims should I go for??
I have 2 coats of primer and 4 coats of TS-14 on it. Not a very good kit as I have problems fitting the chassis to the body... Think this kit has the same mold as the Dragon kit... same problem.
It's about 80% done... I haven't decide which wheels to use... care to help me decide??? hehe.. Thanks for the time.
http://files.automotiveforums.com/uploads/247349DSCF0210_2.JPG
http://files.automotiveforums.com/uploads/334858DSCF0211_2.JPG
Shots of the completed body...
http://files.automotiveforums.com/uploads/414843DSCF0237_2.JPG
Shot of the front end... I used 18' Brembo disc on this one.
http://files.automotiveforums.com/uploads/489067DSCF0233_2.JPG
Shot of the rear... sorry abt the quality... i wanted to have double exhaust tips for this... but I figured out I have to replace the whole muffler... so I opted for a Oval tip.. used BMF on it.
http://files.automotiveforums.com/uploads/536236DSCF0239.JPG
(Frm Left) OZ gran tourismo from Aoshima, OZ gran tourismo from Fujimi, BBS LM from Aoshima... which is better??
http://files.automotiveforums.com/uploads/268380DSCF0240.JPG
http://files.automotiveforums.com/uploads/902120DSCF0241.JPG
http://files.automotiveforums.com/uploads/695930DSCF0242.JPG
Can anyone comment... which rims should I go for??
Hash_man
08-25-2002, 09:16 PM
I would comment, but I cant see the pics dude... sounds like a great model though... would somebody please fix the whole problem with the pics!!
darklight
08-25-2002, 09:37 PM
nice model, and nice choice of rims:cool:
2quick4u
08-25-2002, 11:46 PM
honestly dude..the gold rims look the best !
sk82break
08-26-2002, 01:18 AM
OZ gran tourismo from Fujimi, That middle one looks KILLER
barnabei
08-26-2002, 02:26 AM
i think that the aoshima rims (super tourismo) suit the car best, they got that little lip opposed to the fujimi ones. not a big fan of gold rims on bimmers.
tazdev
08-26-2002, 03:52 AM
OZ gran tourismo from Fujimi
BBCivic
08-26-2002, 04:54 AM
I love this car,
you did a very good work, but in my opinion try put rims like this........
:flash: :flash: :flash:
you did a very good work, but in my opinion try put rims like this........
:flash: :flash: :flash:
Forhod
08-26-2002, 05:41 AM
BBS LM :)
tonioseven
08-26-2002, 07:28 AM
I agree with BBCivic, BBS LMs. I have 4 sets and one set I painted gunmetal to match an upcoming project:) Great job so far!
neo79
08-26-2002, 07:32 AM
well.......BBS LM!!!.....hehehhe black on gold rims...woohoo...it rocks
btw, u guys are lucky ya know...i can't even get replacement rim for my evo 6...arrghh........disaster...here in malaysia they don't sell accessories for scale models...arrrr..if not my evo will be riding on 21 inchers...
btw, u guys are lucky ya know...i can't even get replacement rim for my evo 6...arrghh........disaster...here in malaysia they don't sell accessories for scale models...arrrr..if not my evo will be riding on 21 inchers...
jaykit21
08-26-2002, 08:04 AM
Aoshima's look the best. The fit the car better than the Fujumi's. Save your LM's for a different car too. :bandit:
GTI1800
08-26-2002, 06:41 PM
Hi,
i really like the first selection......
Laurent
i really like the first selection......
Laurent
primera man
08-26-2002, 06:48 PM
OZ gran tourismo from Aoshima
zetaet
08-27-2002, 08:59 AM
Hi guys... thanks for the comments and suggestions... I have decided which rims to use... I wanted to use the BBS LM... but I have other plans for it... wanna put it on my Golf V5. The OZ frm fujimi requires quite abit of modifications... so I have decided to use the OZ from Aoshima... Thanks for the support... will post some pics soon.. ;)
Automotive Network, Inc., Copyright ©2024