Help: Dick Johnson's Sierra decals

Hi Guys,

anyone of you knows if these decals have been ever released ? If yes, what about availabilty nowadays ?

Thanks a lot for your attention.

Bye: Roberto :)

http://i11.photobucket.com/albums/a163/RJ1108/Various/SierraHI.jpg

here is a link to a online shop in New Zealand that still has some.

http://www.modelcraftsandhobbies.co.nz/

then enter shop, left side click on cars/bikes/shops

on list (refine search) under Cars, Bikes and Trucks heading, click on car decals all scales

The the item you want is immediately after the first three cameras. Roodecals 1/24 Ford Sierra ANZ & Shell

Mal

Is that picture from the Goodwood Festival Of Speed last weekend? What a day out that was...

http://i46.photobucket.com/albums/f112/hamishrobson/FOS2006.jpg

here is another one site that has it as well.... decal number 148...

http://www.slotcarworld.com/Decals1.htm

and here is the decal set....

http://www.slotcarworld.com/148p.jpg

good luck with it... sounds like an awsome build. Love the old Sierras...

Print wise the Roodecal sheet is a lot better.

Both Slotcarworld and Pattosplace seem to use a alps printer which does not give as clear a print. With Pattosplace (and probably slotcarworld) you just get the decal sheet without any instructions. Both seem to sell the same sheets.

The Pattosplace deals are ok, not great but useable. The register is not always perfect and they are a little opaque, although they do offer 'better' decals where the white is printed seperately from the other colors on a different sheet. The Roodecals are better quality but the ones I have also look a touch opaque. DMC made a nice set for the OXO sponsored red car that ran in the 87 Bathurst and also a set of the ANZ decals (see my sig for a built up of this).

G U Y S !! Thank you soooo much for the prompt, precious and detailed information !!!! Yes the picture is from Goodwood, but unfortunately I not there :(

Bye: Roberto :)

e. DMC made a nice set for the OXO sponsored red car that ran in the 87 Bathurst and also a set of the ANZ decals (see my sig for a built up of this).

Here is my OXO built a few years ago.
http://i83.photobucket.com/albums/j288/fizzychops/DSC00284.jpg

Hi Roberto
I used the Pattosplace decals for mine, I found them quite good, reasonable registration but VERY thin and tear easily, I asked for a decal placemant diagram and he sent a JPEG drawing of a XR4i with really badly drawn pictures.
I also only ever remember Dicks car having 7 spoke gold rims, not the supplied kit ones.

Cool project though, good luck

sierrasaph, the team ran the first few years with the kit wheels before the team had the 7 spokes wheels made for them.