Our Community is 940,000 Strong. Join Us.


Compressor map help


shadyGs-R
05-26-2006, 08:43 PM
can somebody please help me read a compressor map. I do not understand them. if its to hard to to explain over internet its alright. i been reading this book Maximum boost and its really hard to understand iv had read the math chapter like 6 times and still dosent make sence. can somebody please help me?

hany
05-27-2006, 02:58 AM
read this . it may be explain for you.
http://www.beesandgoats.com/boostfaq/g2icturbo.html#Engine

shadyGs-R
05-27-2006, 07:44 AM
read this . it may be explain for you.
http://www.beesandgoats.com/boostfaq/g2icturbo.html#Engine


thank u...but it dosent have anything in there about compressor maps at all

Greenblurr93
05-27-2006, 09:43 AM
the newest issue of honda tuning has a big article on how to read a compressor map.. it helped me.. check it out.

shadyGs-R
05-27-2006, 11:59 AM
the newest issue of honda tuning has a big article on how to read a compressor map.. it helped me.. check it out.

i have that magazine. i didnt even see that. ima read it right away thx. the new one is withg the yellow civic type r right?

Schister66
05-27-2006, 12:05 PM
back when i had motivation, i put this compilation of car knowledge together....there is a big section about reading compressor maps in there if you're interested.

http://www.automotiveforums.com/vbulletin/showthread.php?t=490574

Why don't you just tell us what you want for power, what motor, when you want spool and whether or not you're built and we'll help you out from there....

shadyGs-R
05-27-2006, 12:43 PM
back when i had motivation, i put this compilation of car knowledge together....there is a big section about reading compressor maps in there if you're interested.

http://www.automotiveforums.com/vbulletin/showthread.php?t=490574

Why don't you just tell us what you want for power, what motor, when you want spool and whether or not you're built and we'll help you out from there....
im not getting a turbo yet. i will be in like a couple of months so im just trying to understand the compressor map. i am starting to get a hold of it with everybodys sugjestions of reading articles that they posted and magazines it is very helpful, thx...i have another question. i no that the integra has 1797cc how do i find out the Cubic inch displacement of the motor? i been searching on google and the forums and i cant find out how to caculate that or find any information on what CID the integra Gs-R motor has

shadyGs-R
05-27-2006, 01:17 PM
alright im almost there. ill tell you guys what i have done and what i dont have done. i have the Pressure ratio down. 14.7+boost/divided 14.7 =Pressure ratio absolute. is that right? that will deterime if i want a turbo at low boost or high boost? is that correct? the only thing i understand about the surge limit is that it is bad and do not want to be on the left side of it. i do not understand how you get the air flow or CFM. i also understand at the right side of the map those numbers are compressors RPM. i do not understand what that red line is and why there is percentage in the middle of the islands. and i dont understand what the islands are. i read all that stuff nd still dont understand can somebody please explain it to me. and i have one more question. are all the compressor maps based on Pressure ratio and Airflow. or is there other stuff that they can put at the X and Y axis other than Pressure ratio and CFM airflow?

shadyGs-R
05-28-2006, 10:27 AM
anybody out there?

shadyGs-R
05-28-2006, 08:26 PM
yoooohoooo

hany
05-29-2006, 06:45 AM
try this
http://www.honda-tech.com/zerothread?id=142398

superbluecivicsi
05-30-2006, 09:37 PM
good find hany. read garret's, then, HT's, then compare it to maximum boost. do you have a physics 101 textbook? some of the formula's and definition of terms will help you understand the concepts better. try looking into ideal gas law. that will give you a better understanding of how gases work. the HT link does a great job in explaning it in lamen terms.

superbluecivicsi
05-30-2006, 09:42 PM
also, try this.

http://scienceworld.wolfram.com/physics/IdealGasLaw.html

hany
05-31-2006, 02:05 AM
iam not from USA iam from EGYPT. and there are no books for turbo and no anyone buy any turbo or even turbo accesories. i bought my turbo from ebay and i read at this site and at homemadturbo and i know how to install my self. and there are no any dyno in my country. so our experiance is littel but i do my best to know every thing from the net.

superbluecivicsi
05-31-2006, 09:03 PM
then maybe you could be the first person in egypt to have this book ;)

http://www.amazon.com/gp/product/0837601606/002-7949866-0360837?v=glance&n=283155

hany
06-01-2006, 03:51 AM
thank you mvery much for your attention. befor i buy it can i find it in any site and i download it or that is prohebted ?

shadyGs-R
06-01-2006, 03:14 PM
then maybe you could be the first person in egypt to have this book ;)

http://www.amazon.com/gp/product/0837601606/002-7949866-0360837?v=glance&n=283155

that book is one of the better books i have read. i had just bought his supercharger book. cant wait to read that. maximum boost is really good tho.

Add your comment to this topic!