today, I drilled the holes for the pins and installed those so my hood pins would actually be functional... lol Also installed the 2000+ Headlight bracket i had to order from the dealership, Did all my wire splicing in like 30 min and now I have a 2000+ headlight conversion... woot woot! Oh yea, btw on the diagram i had posted up, on the driver side, you need to reverse the ground coloring of the wires comming out of the 9007 pigtail. I realized that tonight when i did this.... my bad...

http://img146.imageshack.us/img146/2690/20060523image00044hf.jpg

http://img146.imageshack.us/img146/5448/20060523image00053ff.jpg

http://img146.imageshack.us/img146/9781/20060523image00035td.jpg

The headlights are not fully bolted down, the damn crush guard under the headlights is messing up them properly fitting into the bracket for the headlights on both sides, So I guess I need to round up a Sawz-all and have my way with the damn crush guard.... ha ha ha... At the rate I am going, I will have this project done in no time at all... :D

... Stay tuned for updates...

not looking to bad man. keep posting pics as u progress :grinyes:

some progress!

wish i could be making progress instead of waiting for stuff.

when you order stuff online it should be instant delivery, after all they do take the payment instantly, or damn close to it.

man, thats awesome

I thought your hood came with pins installed.

I thought your hood came with pins installed.

It did, I had to drill the radiator support bar so i could install the bolt that the pin slides through.. Thats what i meant to say, i had a brain fart.

you not doing clear cornors?

you not doing clear cornors?

Looks like they are clear corners...he just has an amber bulb. I may be wrong though.

Looks like they are clear corners...he just has an amber bulb. I may be wrong though.
I think your right

They are actually the Euro black ones from Jbodysource.com, i used the amber bulb i had from the clear bumper signals, i will eventually get the silverstar ones that look chrome when not lit, but thats not big on the TO-DO list at the moment. Tomorrow is remove the stock bushings control arm bushings and then install the new ones. Also tackel drilling out the rivots for the new lower ball joints. I'm soo glad I am good friends with the RDFABS guys, chris informed me tonight they have a 20 ton press i forgot about. So should be a piece of cake now...

They are actually the Euro black ones from Jbodysource.com, i used the amber bulb i had from the clear bumper signals, i will eventually get the silverstar ones that look chrome when not lit, but thats not big on the TO-DO list at the moment. Tomorrow is remove the stock bushings control arm bushings and then install the new ones. Also tackel drilling out the rivots for the new lower ball joints. I'm soo glad I am good friends with the RDFABS guys, chris informed me tonight they have a 20 ton press i forgot about. So should be a piece of cake now...

I've got the silverstar bulbs that look like different colors depending on your angle when not lit, but amber when lit.

I've got the silverstar bulbs that look like different colors depending on your angle when not lit, but amber when lit.
were did you get them at?

I've got the silverstar bulbs that look like different colors depending on your angle when not lit, but amber when lit.

yea those are the ones i was reffering to...

they are like 19.99 at any auto parts store. I believe the part # is 3157, pretty sure atleast.

Thanks