|
|
82 cimarron no start1987ss 05-22-2006, 11:59 PM im helpin a buddy trying to get it running.. it has 111k on it its a 1.8. that has ben well maintaned. it ran fine when it was parked it was parked for winter now when you try to start it it rotates,gets spark and fuel but no start.. it started for a minn but died out and it sounded like it was 180 out of time but distributer was never out.. if you pull plugs and dry out cylenders it will attempt to start... please and advice will help thank you!! :banghead: :screwy: :banghead: 1987ss 05-23-2006, 11:12 PM anyone??? timing chain?? no thoughts?? 1987ss 05-28-2006, 11:56 PM no one at all????? DFBonnett 05-29-2006, 07:56 AM It sounds like weak spark. Check the coil. Check the inside of the cap. On the fuel side of things, have you checked fuel pressure? Does starting fluid help at all. Since it sat all winter, check the air intake for an obstuction due to some critter building a nest. Have you tried some fresher gas? FWIW YMMV 1987ss 06-04-2006, 01:06 AM i wish i would of read your post 2 days ago!! the timing chain was fine! the spark is WEAK like you said... what happens if you assemble it and a tensioner on timing chain is missing? new chain but no tensioner!!! DFBonnett 06-04-2006, 09:02 AM I'm not sure on your engine but my intuition tells me the valve timing would be out. You might even seriously damage the engine even trying to start it. I doubt it would start or even run, much less correctly. I think you have to open it up again and correct the deficiency. FWIW YMMV 1987ss 06-05-2006, 01:41 AM I'm not sure on your engine but my intuition tells me the valve timing would be out. You might even seriously damage the engine even trying to start it. I doubt it would start or even run, much less correctly. I think you have to open it up again and correct the deficiency. FWIW YMMV how would i go about correcying valve timing? its the 1.8... changed coil and had moduel checked still no start:banghead: please help DFBonnett 06-05-2006, 07:00 AM You noted that a tensioner is missing? You'll have to replace any missing or broken parts. I'd recommend getting a Haynes or Chilton manual for reference. I can't offer specifics as I am not familiar with that engine. 1987ss 07-03-2006, 03:13 AM it was the carb the whole time it needed a rebuilding....... vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|