alright, i am having trouble getting spark out of my coil. i have a blaster 2 coil.
i have the green and black wire to negative, and i have the red and black to positive. everytime i crank the motor over and check to see if there is spark coming out of the coil i get nothing.

i have all of the original wires hooked up to the stock coil except the two pos. and neg. coil wires.

I also have another question as to what the other wires going to the stock coil actually do. there is a green and black, a solid black, and a white wire, that plug into the stock coil, and then there is a slide on plug that plugs into the stock coil by itself. what are these all for? do i need them?

My last question is that i noticed there is some type of relay that the green and black, and red and black coil wires split off from.. 4 wires are connected to the relay, a thin orange and red, a thin solid black, and then a thick green and black, and a thick red and black. what does this relay do?

THIS IS A LINK TO SHOW HOW MY WIRING IS CURRENTLY SETUP TO THE T, PLEASE HELP I NEED TO FIX!!

http://putfile.com/pic.php?pic=4/11518573067.gif&s=x402

thanks alot guys

-tim

damn, this question is way to much for us on AF to handle. and your car is fucking awesome tim. Has anyone seen cory lately?

damn, this question is way to much for us on AF to handle. and your car is fucking awesome tim. Has anyone seen cory lately?
he joined the service a few weeks ago, just when i start getting my car running and need his help. nice timing cory, haha.