have replaced fuel pump,icm,all new wires,plugs,coil,distributor and relay.it ran fine for 3 weeks and just stopped.the engine will crank but won't turn over.also replaced fuel filterand all fuses are good.any suggestions. :banghead:

if it worked fine before, you might have a loose connection, do you get any spark ? no CEL ?

getting no spark at all.

getting no spark at all.

I would get a Haynes' manual and go through each of the ignition components (ICM, coil, etc) and check for resistance. Usually no spark means a bad coil (it may have failed already).

I would get a Haynes' manual and go through each of the ignition components (ICM, coil, etc) and check for resistance. Usually no spark means a bad coil (it may have failed already).Agreed... Haynes has a pretty good walk-through on this. My 94 died in the same way. Also keep in mind. If there is a prob with your dizzy just replace the whole thing. You get more for your money. I think mine was around $180 at NAPA.