Does anyone out there know how much hp a stock spoon engine has? Also how much does a whole motor swap package usually go for? (motor, tranny, ecu, axles, all the goodies needed)

by the way i mean the b18c spoon engine

Sorry for me being naive, but what is a spoon engine? Is it just a type of engine? What makes it so good/fast? I remember hearing about it in The Fast and The Furious, and in GT3 there's a Spoon S2000. Just wondering, thanks! :)

jcl- It's a very very expensive highly tuned engine made from the manufacture Spoon Sport in Japan . They make really really good aftermarket stuff for your honda or acura . I'll post some specs of the spoon engine if i can find the site . Peace

Cool, thanks! :)

I think price depends alot on the parts that you get on it.. Im pretty sure they have different stages..(I maybe wrong.. )

i've been wondering the same thing ever since i saw that movie. i'm sure it's not cheap to get one. some specs would be great!!

check out www.modacar.com

a spoon engine has 250 to over 300 hp

I'm not sure but I thought spoon blocks were larger? Like a spoon b18C motor is 2.0 L (even though the engine code indicates a 1.8) etc....

Doesn't a spoon engine cost about 10g. What is the best turbo to put on to a spoon engine if thats saying if you even need one

isn't spoon engines made for N/A....?
cuz they have high compression ratio..

man u guys dont know much about cars. a b16a engine comes w/ 190hp.
a b17b comes w/ 200hp. a b18c comes w/ 210hp. the engines cost $4260. of course u can put turbo on a spoon, u can put turbo on anything, just that it might blow out ur engine.

FYI: a spoon engine is'nt made for 1/4 mile racing. its made for touring

i priced one for my civic, complete deal top of the line 2.0 liter with everything on it and it was $6000 for motor alone. but that was like 4 years ago so its probably changed.

Is a H22a a spoon engine? Errrr I wish everyone would just call them all the same damn thing. Im so confused!

spoons are strickly for racing and you have to rebuild them to change your oil. also they preform best at insanely high rpms.. streetable yes.. costly .. very ...

found a kit from spoon... don't know how to buy it in u.s.... costs under $800 u.s.... lots of other stuff, too... http://www.spoon.jp/eng/products/lineup/lineup_6.html

Spoon Engines cost $3245.92, with $2131.83 in shipping costs. That comes to $5372.22 just for the engine delivered to your door. Contact them directly and you'll get the same price. Here in America, they charge anywhere from 7,000-9,000 for a new engine from them. :smoker2:

==============================================
man u guys dont know much about cars. a b16a engine comes w/ 190hp.
a b17b comes w/ 200hp. a b18c comes w/ 210hp. the engines cost $4260. of course u can put turbo on a spoon, u can put turbo on anything, just that it might blow out ur engine.
---------------------------------------------------------------------------------

man you dont know much about cars the b16a comes with 160-170 hp depending on the series and the b18c comes with 195hp

TRIED TO REPLY BUT STARTED NEW POST (SORRY). HAD THIS A WHILE AND HOPE IT HELPS

http://www.inlinefour.com/motors.html

A B18C spoon engine costs $6,370.00 at www.inlinefour.com

Ok man you really wanna know what a stock Spoon pushes......
right around 300 HP...... the standard cost is L10,000.... not american
I get these parts cheaper..... however the spoon is a bitch.... and it takes a bitch to drive one :P!!!

Ok guys heres the deal
B-16 = made in the early 80's fairly cheap with bout 180 HP
B-18 = made soonly after the B-16... this is the engine you build up
to form the Spoon engine this one is pretty pricy... 250 HP
spoon = made from the B-18 w/ alteration this bitch is a 300 HP
make sure you have a good chip!!!!
A22H = this is a Prelude engine.... it has about 220 HP and it's pretty
nice... but for a civic... requires some work
Civic Type R - very nice engine.... I give props to this one 190-200 HP
this is all I know.... I hope it helps you guys out

Originally posted by dreamin'large
TRIED TO REPLY BUT STARTED NEW POST (SORRY). HAD THIS A WHILE AND HOPE IT HELPS

http://www.inlinefour.com/motors.html
Just bought my ctr engine from them and it should be here late next week. I'll let you know how I feel about it after the install.

Does n e body know specs on a gsr engine for a 98 civic hb?








TeAm_iCoN

Originally posted by SpOoN_CiViC_R
Does n e body know specs on a gsr engine for a 98 civic hb?
What kind of specs? That's a pretty vague question... and since when did they make separate gsr's for civics only? :rolleyes:

Yeah, I thought there was a lil' old car called the "Integra" or something that came with the GSR engine ;) ....

Spoon engine's are nice, but it's much more cost effective for me to buy a B18 locally, build it, and turbo. I'd save quite a bit of money on shipping alone!

Aiight u guys this is what i Know about the spoon engines. I know that they can rev all the way up to 12,000 RPM. As some of u guys said it, it is a touring car. I think it produces up to about 250 hp or a lil less. It is a high rev engine that should be only used for track races but since they do sell it (for a very high price) I guess if u want to you can buy one and drive it. The reason why this is a track car is because since it is a high rev engine, there is going to be a lot more heat than a regular H22 or B18 engine. (A lot more) I heard that people who have the spoon engine has a magnet in their oil pan so that if a piece of an component in the engine cracks and breaks that is where it will stay at. If u guys think I'm wrong in anything, give me a shout and we will talk about it. (I love talking about cars) And if anyone of you guys have a 2001 Honda S2000 with a Turbo system in it, plz IM me and tell me where and for how much you got it. Thanks for your time you guys!

i am looking for the same thing, and www.inlinefour.com has spoon longblock engine assemblies for b16A b16B and B18 from $5000-$7000 depending on the model of engine. Hope this helps man.

Originally posted by jdmjon51
i am looking for the same thing, and www.inlinefour.com has spoon longblock engine assemblies for b16A b16B and B18 from $5000-$7000 depending on the model of engine. Hope this helps man.
Thanks for bringing up a month old post and repeating what somebody already said noob. Great first post.
Originally posted by twin t vtec
A B18C spoon engine costs $6,370.00 at www.inlinefour.com

==============================================
man u guys dont know much about cars. a b16a engine comes w/ 190hp.
a b17b comes w/ 200hp. a b18c comes w/ 210hp. the engines cost $4260. of course u can put turbo on a spoon, u can put turbo on anything, just that it might blow out ur engine.
---------------------------------------------------------------------------------

man you dont know much about cars the b16a comes with 160-170 hp depending on the series and the b18c comes with 195hp
---------------------------------------------------------------------
Okay ure all morons, 1st of all b16a,is the exact same engine outta a stalk civic, it comes with 145 hp, an acura gs integ is basically the same which comes with 148 hp its a b18c3 a peice of crap with no v-tek, gsr, is a b18c4 which comes with 175 hp with v-tek, b18c5 is a type r engine stalk with 195hp with v-tek 8900rpm 168b ft of torque, or theirs the jdm b18c5 comes with 205 hp a redline of 9100 rpm and 171 lb ft of torque, and i have a jap spoon in my integ and its a b18c5 bored out like crazy, and got put in my car with no mods hitting 230 hp almost 10000 rpm and 191 lb ft of torque, costing me $4200.00 with trade in of stalk type r and put in for $2800.00 so about 7g's, and yes u have to take the whole engine apart to change the oil. its a bit#ch

---------------------------------------------------------------------
Okay ure all morons, 1st of all b16a,is the exact same engine outta a stalk civic, it comes with 145 hp, an acura gs integ is basically the same which comes with 148 hp its a b18c3 a peice of crap with no v-tek, gsr, is a b18c4 which comes with 175 hp with v-tek, b18c5 is a type r engine stalk with 195hp with v-tek 8900rpm 168b ft of torque, or theirs the jdm b18c5 comes with 205 hp a redline of 9100 rpm and 171 lb ft of torque, and i have a jap spoon in my integ and its a b18c5 bored out like crazy, and got put in my car with no mods hitting 230 hp almost 10000 rpm and 191 lb ft of torque, costing me $4200.00 with trade in of stalk type r and put in for $2800.00 so about 7g's, and yes u have to take the whole engine apart to change the oil. its a bit#ch
This is probably the funniest grammatically incorrect post I've ever seen in my life.

Ok... almost everyone in here is stupid as shit :thefinger . You do not have to "pull apart" your spoon to change the oil. WTF are you thinking, if you know anything about engines you would know that almost every engine has a oil drain plug, and a cap on the valve cover to add oil... :loser: :for the price of a spoon, it depends where you buy it. buy it straight from japan, and pay 4,200 for the engine, not including shipping. buy it here, spend up to 6K. And if anyone wants to argue me about this, I will tell you that I spoon engines in all of my hondas, and I have built more spoons than most of you have shit in your life. so if you think your the shit and know everything there is about spoon engines, test me. You will lose. :rofl:

hey look it's king toughshit who drives a Lamborghini, which I believe about as much as the existance of unicorns. I like this in you profile, "I build cars, race them, and NEVER lose." Please go lick a power outlet.

hey look it's king toughshit who drives a Lamborghini, which I believe about as much as the existance of unicorns. I like this in you profile, "I build cars, race them, and NEVER lose." Please go lick a power outlet.

ok... so why am I so tough shit? just because I have a lamborghini? how old are you? 10? well. I'm sure that you have never even seen a spoon, or that fact a lamborghini, so I would be talking. tough shit... :thefinger

plus... I'd like to see you take me in your pos 1.8L. 1.8...6.0...hmmm... thats a hard one.... how much did your car cost? 2000$ if that? try 300K buddy.

What's there to see, 1.8 stroked red top with a bunch of nifty overpriced Spoon hoses? Wow. I've seen a ton of lambo's, never driven one, but who cares, I've been in cars faster than any of them. You need to leave this forum, nobody likes cocksuckers on a high horse like you who trot in and start talking shit.

plus... I'd like to see you take me in your pos 1.8L. 1.8...6.0...hmmm... thats a hard one.... how much did your car cost? 2000$ if that? try 300K buddy.
well no shit, a Lambo can beat my Civic... I'm crushed... $25k poured into my Honda could make it run circles around your overpriced pile of metal anyways, but since you're a gay 16 year old who wishes he had one, it doesn't bug me a bit.

well no shit, a Lambo can beat my Civic... I'm crushed... $25k poured into my Honda could make it run circles around your overpriced pile of metal anyways.

wow 25,000$ been working at mcdonalds that long huh? and... you just said my lamborghini could beat your pos, then you say you can run cirlcles around mine? lol :loser: btw... my car is composit, not metal. bitch

haha. 16... try 25, your how old? I want to know so I can bag on you some more.

you just said my lamborghini could beat your pos, then you say you can run cirlcles around mine?
With that money.. damn dude, can't you read? Let me guess, some grandpa died and left you a ton of money.. you definitly didn't earn it yourself. Some day when I inherit money from a rich relative I'm going to spend $300k on a car (which is absolutely disgusting as is) and go laugh at people who drive Civics. That's my main goal in life, then I'll be happy.

also I want to know what cars you have been in faster than my lamborghini? I would really like to know. punk ass teenager :thefinger

[I live in Las Vegas, I earned all the money I have made fair and square, I dont need dead peoples money.

let the thread die, take it to pm's, nobody cares about this fight.

also I want to know what cars you have been in faster than my lamborghini? I would really like to know. punk ass teenager :thefinger
If anybody's a punk ass teenager it's you. The MSRP for an '03 Mucielago-wannabe is only $170,000... just a little lower than your claimed $300k. Damn I hate lying attention whores like you. I've driven a Murcury Capri (runs 11's), rode in a Viper GTS and supercharged Camaro. Proffessionals ran the Gallardo at 12.2 in the 1/4.

You guys got some knowledge.

I wa gonna get a spoon engine until I heard you have to break the engine down to change the oil.
I'm not a track racer, i'm not even a street racer because my car is so sloooowwww. I got a 95 4 dr civ dx. I want to put an h22a in my car because it has the most bang for the buck (200hp vtec & 220hp type S). From what I read the h22a will weight more causing more understeer.



So how do I get around this problem. I want torque as well as precise steering. What engine is built to the same standards as spoon engine, but made for "non-professional" street racers.

[QUOTE=goatnipples2002]You guys got some knowledge.

I wa gonna get a spoon engine until I heard you have to break the engine down to change the oil.

you dont have to break down the engine to change oil in a spoon. you change it the same way you do in any other engine.

Learn how to use the quote feature n00b.

Learn how to use the quote feature n00b.

this kids a bitchass

this kids a bitchass

guys, let the thread die.

take it to PM if u'd like to bicker w/ eachother.

if u have a question about spoon motors, START A NEW THREAD.

thx... :biggrin:

i need some advice on what kind of engine to put in my 95 civic dx?

i need some advice on what kind of engine to put in my 95 civic dx?
DIE DIE DIE

im serious im a new car finatic and i just got it and already blew my engine racing! and need a new one with a little bit more get up and go?

i need your advice for my car i want a new engine but i dont have the cash for a spoon so what would be the best engine for my car and it needs a little more horses than the stock 92hp?:angryfire

Dude this thread died of over a month ago and you brought it back to ask a totally off-topic question. My advice is you make a new post, or ACTUALLY SEARCH ON YOUR OWN (omfg what a concept) through the 2374082340982309423 other noob posts asking the same question.

if anyone cares, the correct power numbers from the manufacturer would be

b16a 158hp/111tq
b16a1 150hp/109tq
b16a2 158hp/113tq
b16a4 170hp/116tq
b16b 180hp/115tq
b17a 160hp/117tq
b18a1 130hp/126tq or 140hp/121tq
b18b1 142hp/127tq
b18c(jdmR) 200hp/134tq
b18c1 170hp/128tq
b18c2 167hp/128tq
b18c3 193/127
b18c4 169/127
b18c5 195/127
b18c6 190/131

also, if you have a lamborgini why are you on this pos forum? the answer is because you're either the dumbest lamborgini owner ever or because you're the biggest loser that owns a lamborgini, either way, if you wanna talk about how your murcialago is bad ass go to hondatech or something so they can bust out 800 hp dyno graphs from a 13k car...not that horsepower is pussy power...any real lambo owner knows that...but you can basically trade 5hp for one pp :)