My 2000 QX4 front driver side power window died. I've read about switch issues. How do I remove it? Also, the HVAC Blower just stopped entirely. Any fuse for this? Please advise. GR

i am assuming you have auto air being it's a QX. Did all Blower speeds fail and you only have high? or you have no speeds at all . Do the controls still Illuminate as if it works , if it's auto air. There are fuses you can check , if you only have high speed you'll need a blower motor resistor. You can also check to see if the blower motor is getting power , it's only 2 wires . other than that if i had more info i could maybe be more helpful.. GL :)

Thanks a bunch. Yes, Auto air. The blower completely stopped working while the blower indicator lights operate normally. That is the blower speed indicator will change from one paddle to 4 depending the system need. No air, no how.

I pulled out and put back ALL the fuses in the pasenger compartment behind the coin tray hoping for a bad connection issue. The two 15 amp fuses marked for the blower appeared fine. I haven't checked all the fuses under the hood as there doesn't appear to be one fuse marked for the blower.

Any thought on the power window?

Much Appreciated,

GR