help with codes
danielc22
03-29-2006, 01:35 PM
what do the codes p1684 and p0700 mean?
das2123
03-29-2006, 02:59 PM
what do the codes p1684 and p0700 mean?
P0700 - Transmission Control System Malfunction
P1684 - PCM has lost power while the car is off. Your battery posts may be corroded or a battery wire may be losing it's connection.
P0700 - Transmission Control System Malfunction
P1684 - PCM has lost power while the car is off. Your battery posts may be corroded or a battery wire may be losing it's connection.
danielc22
03-29-2006, 03:59 PM
P0700 - Transmission Control System Malfunction
P1684 - PCM has lost power while the car is off. Your battery posts may be corroded or a battery wire may be losing it's connection.
how can i fix this malfunction?
P1684 - PCM has lost power while the car is off. Your battery posts may be corroded or a battery wire may be losing it's connection.
how can i fix this malfunction?
das2123
03-29-2006, 08:32 PM
how can i fix this malfunction?What is your car doing? You have to try and describe it...
danielc22
03-30-2006, 02:00 PM
What is your car doing? You have to try and describe it...
it takes off fine in drive and reverse but when it should shift to second it goes to neutral until i put it in park then drive again.
it takes off fine in drive and reverse but when it should shift to second it goes to neutral until i put it in park then drive again.
das2123
03-30-2006, 03:19 PM
it takes off fine in drive and reverse but when it should shift to second it goes to neutral until i put it in park then drive again.MTX or ATX?
danielc22
03-30-2006, 06:14 PM
MTX or ATX?
atx
atx
das2123
03-30-2006, 10:17 PM
Check your throttle cable and fluid level. If fluid is low, only use Mopar ATF+4 to top it off.
danielc22
03-31-2006, 06:15 AM
i dont know what to look for on the throttle cable but the tranny fluid was full and it smells burnt
das2123
03-31-2006, 08:34 AM
i dont know what to look for on the throttle cableCheck to make sure it's working correctly. You will have to take the battery off to get to the linkage.
danielc22
03-31-2006, 10:20 AM
Check to make sure it's working correctly. You will have to take the battery off to get to the linkage.
i really dont know what to look for when i get to it. And is my tranny toast since the fluid really smells burnt:banghead:
i really dont know what to look for when i get to it. And is my tranny toast since the fluid really smells burnt:banghead:
das2123
03-31-2006, 10:56 AM
i really dont know what to look for when i get to it. And is my tranny toast since the fluid really smells burnt:banghead:Pick up a Haynes Manual for the throttle linkage. And no the burnt smell does not necessarily mean it's toast. Although you might want to do a fluid and filter change now!
danielc22
03-31-2006, 11:18 AM
Pick up a Haynes Manual for the throttle linkage. And no the burnt smell does not necessarily mean it's toast. Although you might want to do a fluid and filter change now!
ok, is the filter right there when u pull the pan off?? and what would it do if the throttle linkage was messed up??
ok, is the filter right there when u pull the pan off?? and what would it do if the throttle linkage was messed up??
das2123
03-31-2006, 01:29 PM
ok, is the filter right there when u pull the pan off??Yep, it's the first thing you see. I would suggest adding a drain plug while you have the pan off also, makes life easier for the next time.
what would it do if the throttle linkage was messed up??It could be stuck or not functioning properly which could cause bad shifting or hesitant shifting.
what would it do if the throttle linkage was messed up??It could be stuck or not functioning properly which could cause bad shifting or hesitant shifting.
danielc22
03-31-2006, 01:52 PM
Yep, it's the first thing you see. I would suggest adding a drain plug while you have the pan off also, makes life easier for the next time.
It could be stuck or not functioning properly which could cause bad shifting or hesitant shifting.
ok thanks for your help
It could be stuck or not functioning properly which could cause bad shifting or hesitant shifting.
ok thanks for your help
Automotive Network, Inc., Copyright ©2026