The remote stopped working. The battery is okay -- whatever, the remote doesn't work anymore. Could somebody inform me where I can get a new remote that works on this car? Or how I can repair my current remote. Thanks.

The remote stopped working. The battery is okay -- whatever, the remote doesn't work anymore. Could somebody inform me where I can get a new remote that works on this car? Or how I can repair my current remote. Thanks.

If you are talking about the key fob remote entry clicker you can replace the battery. there is a tiny philips head screw on back. Remove it, carefully open case to reveal the battery. go to Radio Shack and get new one.

Ed

I've replaced the battery. And, it still doesn't work. I was wondering about getting a aftermarket remote. Do they work very well? Thanks.

Do you have 2 remotes or just the one you use? If you have 2, does the other one work? If not, then the problem lies in the entry system itself.

You may need to reprogram the remote (see below), if that don't work, try EBay for another one. If you get another one, it will have to be programmed to your car anyway!

Jump the (ALDL) Assembly Line Diagnostic Link. You will find this connector under the driver side dash, but you will have to look through a square cut out in the panel to see the connector, it is recessed behind that panel, almost directly under the steering column.

Jumper pin A to pin G with a fused jumper (3A)
Doors will lock and unlock
Press the UNLOCK button on the remote
Doors should lock and unlock again
if you have more remotes press their unlock button (up to 4)
remove jumper wire
________|________
[F] [E] [D] [C] [B] [A]
[G] [H] [J] [K] [L] [M]

Currently, I have only one remote. How can I purchase one or two new remotes and have them programmed for the car. Thanks.

Currently, I have only one remote. How can I purchase one or two new remotes and have them programmed for the car. Thanks.

Follow the procedure above and you can program up to four (4) remotes.