|
|
'94 G20 AC/Heater Fanmdhoff 03-14-2006, 10:37 PM '94 G20 AC/Heater fan only runs on 4/high will not run on 1/low 2/mid or 3/mid-high. Is it the fan motor or switch or something else. Thanks for any help you can give. mdhoff 03-14-2006, 10:44 PM DAH! just read Readingsaint's post with the same prob. must be the resistor. Is the resistor located at the fan motor? :screwy: Thanks again. speediva 03-26-2006, 05:33 PM The blower motor resistor is over on the passenger side in the foot well under the glove box. Look in one of the other thread about replacing it. It's a VERY common problem on the P10 G20s. vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|