|
|
99 v6 to 98 duratech swapskateshop88 03-06-2006, 08:52 AM hey guys, I have a 99 taurus, it's got 135000miles on it, it was a fleet vehicle. The Tranny's as you all may know are not that great in them. I have hesitations etc. and the check engine light comes on and off sooo... my mechanic says its the torque converter. but I have a 98 duratech with 37000 miles just sitting there. It has the tranny also. the only thing i'm missing is the ecu, didn't pull it at the time. Questions are: 1. Will it fit? 2. Anyone know where i can a cheap ecu? 3. Is it worth it? I have done engine swaps before(1983 280zx with a fully blown 350) thanks for the help guys mwt878991 03-07-2006, 06:42 AM If you are up to a complete wiring swap and everything that that implies then go ahead. YOu can buy a 99 Duratec Taurus fro about 3K. I am a pretty good wrench and there is no way I would tackle a project like this based strictly on economics vs effort/difficulty. Mike :smokin: skateshop88 03-07-2006, 09:01 AM hey thanks for the input, car still drives, so i'll drive it till it dies Millermagic 03-07-2006, 05:17 PM Tauruss are a dime a dozen. If you want a taurus with a duratec, get a taurus with a durated. You might have problems with the swap. skateshop88 03-09-2006, 08:08 AM I'm gonna put the taurus away for awhile, take out my 280zx vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|