Please Help Me
Trickx
02-02-2006, 02:15 PM
Hey i have a 1993 PI Crown Vic and my cruise control and horn has stoped working.... how can i test this or fix this....
way2old
02-02-2006, 05:43 PM
Check the cruise control module. Pin 6 and pin 10 are grounds. The ground wires run over to the fender to a small bolt. If these grounds are not good, the cruise and horn will not work. Funny I inow, but Ford runs the horn ground through the cruise control module.
BMFer1
02-04-2006, 07:39 PM
They also use the same fuse. Check your fuses.
Trickx
02-07-2006, 08:17 AM
thanks way2old...im going to check this and try 2 fix my problem....
BiggerJon
02-08-2006, 12:38 AM
should be an easy fix.
reekor
02-08-2006, 05:08 PM
On the inside of the driver side fender, there are a few wires bolted to it, one of those wires is the ground for the horn, check your connection there.
Hey i have a 1993 PI Crown Vic and my cruise control and horn has stoped working.... how can i test this or fix this....
Hey i have a 1993 PI Crown Vic and my cruise control and horn has stoped working.... how can i test this or fix this....
irish30
02-08-2006, 08:28 PM
Is your air bag light on? Under the wheel is a clock spring or sliding air bag contact. If it is faulty the horn and cruise will not work. The wiring for them goes through the clock spring.
Trickx
02-09-2006, 01:29 PM
hey if my air bag light is not on constantly could it still be what you are talking about....b/c i checked my ground conections and they are tight...and before i re-run them i want to explore all of my options...
irish30
02-10-2006, 02:30 PM
It is possible, but if the light is not on you may have wiring issues.
Automotive Network, Inc., Copyright ©2024