I have problem with my remote key in my 95 Nissan Primera 2.0

the key fob not work, only 1 /100 chance ! So I could not turn the red LED off, then can not start the Car !

Does any one could give me some idea ! Is that the problem of fob, need reprogramming ? How ?

Many thanks !!!

Hi, Nats 1 system like yours will have to got to the nissan dealer to be re-programed. should not take them more than 5 mins.

You mean NATS 1 could not be re-programmed by the method you mentioned : switch on-off 6 time.... ?

Many Thanks. Nissan Tech

Urgently need some advice !!!

I cannot turn off the NAT 1 (told), so canot drive and take the car to Nissan dealer, then how can they reprogram the remote key ?

Whether I could have any chance to reprogram by myself ? !!!

Hi Tclcom,

the only way is to go to the NISSAN DEALER. you CAN NOT program the fobs yourself.
It is possible to bypass the system. if you feel you have the technical know how, read my other posts. it is not that easy to do.
regards

Great ! I will go to Nissan Dealer and see what they could do !

Thanks you !

The dealer won't like to reprogram it unless I towed the Car to them...

If I could bypass it by disconnect it only ?

To bypass the NATS system is not an easy job. if you feel you have the mechanical skills than i can tell you how to do it. You will need to remove the glovebox and the heater motor to gain exess to the nats immu (control unit). I have a bypass plug made up i can send you pictures so you know which wires you have to link to bypass the nats system. let me know.

I would be glad to receive any help from you !

My email:
tclcom@hotmail.co.uk

Thank you so much !

Hi,
Have emailed pictures to you also.
ok i know for the P10 you have to link as follows.
link pins: 1&2
5&6
7&8
Pins 3&4 are not linked.
hope it helps you out.
regards

Hi, Thanks you so much, however, I havenot received yet;

Would you like try my another email box: tclcomgod@hotmail.com

Many thanks