My 94 Jgc Ltd Info Center Says I Have A Rear Brake Light Out And I Have Inspected All Bulbs For Burned Fillaments And Proper Application And All Seems Correct.is There Any Self Test I Can Do To The Info Center Module?

check to see if your 3rd brakelight is out. I also had the same problem,vic telling me bulb was out but all worked. ended up being one ofthe brake light bulbs. the contact points n the bul was worn down and there was no good connection. try replaceing the brake light bulbs.

Thanks For The Suggestion. I Will Try New Bulbs Thru Out The System And Let You Know.

A year ago the VIC was blinking it's evil message at me "rear lamp failure" and I looked time and time again and not one light was dead. I finally got so frustrated I opened both tails and pulled every bulb to swab them with bulb grease. Lo and behold I had a nasty corroded bulb in there. It was still lit, but it wasn't until I pulled it to cover it with the grease that I saw the base was all loose and wobbly.

The VIC hasn't made a peep about lights since I replaced that one.

A year ago the VIC was blinking it's evil message at me "rear lamp failure" and I looked time and time again and not one light was dead. I finally got so frustrated I opened both tails and pulled every bulb to swab them with bulb grease. Lo and behold I had a nasty corroded bulb in there. It was still lit, but it wasn't until I pulled it to cover it with the grease that I saw the base was all loose and wobbly.

The VIC hasn't made a peep about lights since I replaced that one.
THANKS ILL TRY THAT THIS WEEKEND