|
|
Starter keeps turning after the ignition is turned offtjrags 01-07-2006, 01:26 PM I suspect it's the solenoid. I drove through a flooded road and figure the solenoid got water in it. Is the solenoid seperate from the starter? Any help would be appreciated Thanks Tony swiftknight23 01-23-2008, 12:04 PM as for your problem id check to make sure, 1 battery has a good charge, 2. the voltage regulator is suppling the right amount of current, 3.the ignition switch is still working, 4. the ignition coil is working, 5. the solinoid is working. after you have checked these, check your idel speed, and make sure your fuel injectors do not have a leak. on the older truck the solinoid was mounted under the hood, most of todays model trucks(1990-present) sometimes have them mounted on the starter. hope this helps Terrell randy78 03-26-2008, 12:09 AM could be contacts in the starter sticking, due to age/wear try new contacts mine is doing the same thing intermittedly it needs new contacts i know good luck vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|