Does anybody know of a site where I can find how to install Halo angeleye headlights and gauges into a 1993 honda civic? Or does anybody have any suggestions on installing them?

I installed some angel eyes on my '93; wasn't too difficult. my actual headlights just plugged into the stock wiring harness. as to the angel eye function, i checked out the wiring diagram from my haynes manual. i wired the ground wire to a ground, and wired the power to the parking lights, so they come on with those.

you are going to need to take off ur front bumper

you are going to need to take off ur front bumper

Do you know how I would go about doing that?

I installed some angel eyes on my '93; wasn't too difficult. my actual headlights just plugged into the stock wiring harness. as to the angel eye function, i checked out the wiring diagram from my haynes manual. i wired the ground wire to a ground, and wired the power to the parking lights, so they come on with those.

Did you also have to remove your bumper for the installation? And when I purchased the lights they didn't come with a manual of any sorts.

Did you also have to remove your bumper for the installation? And when I purchased the lights they didn't come with a manual of any sorts.

yea, i had to take of my front bumper. mine didnt come w/ any manual either, but i followed the instructions for oem replacement from the manual i mentioned before. mine were exactly the same as stock except that the new lights came w/ a harness that tied them together power wise, so now if one light fails to get power they both fail, and the additional wires for the angel eyes. what kind of guages are you installing?