tranw would slip out of gear then back in no codes with key, dealer said it was dead (DONT TRUST THEM) Droped pan, a little bit of fileings in it I've seen worst, I was going to try and flush out system and clean sensors what do you think

tranw would slip out of gear then back in no codes with key, dealer said it was dead (DONT TRUST THEM) Droped pan, a little bit of fileings in it I've seen worst, I was going to try and flush out system and clean sensors what do you think

Dealer told me 2 years ago my tranny was toast, turned out to be the soleniod pack. I know from experience if the sensors get metal filings on them they act up and cause problems without necessarily showing a trouble code. Have you replaced the solenoid pack before and how old is the tranny?

Dealer told me 2 years ago my tranny was toast, turned out to be the soleniod pack. I know from experience if the sensors get metal filings on them they act up and cause problems without necessarily showing a trouble code. Have you replaced the solenoid pack before and how old is the tranny?


I removed the pack to check it out, cant see much and I dont want to open the pack it self. Don't know for sure how old only had the van one week. I plan on removing the sensors to clean them up when I flush the system
thanks

If it is doing that there is code someplace.
Get it on a good eng/trans capaable scanner and check it out. A good trans scanner has a lot of info on the trans and will show code history or present.
Get code no and post back codes.
MT