For sale: modified LT1 intake manifold

Ive changed directions with my car. Im gonna work on the suspension and drivetrain and exhaust for a little bit before tearing up my motor. I have subframes, strut brace, and some other stuff on order already. I just want what I have in it. LT1 intake manifold modified by John Millican for use with a distributor with intake bores opened to 52mm. It comes with fuel rail, regulator and hose barbs to hook to fuel lines. It will only bolt to lt1 heads right now but the current owner of www.lt1intake.com (http://www.lt1intake.com) will finish modifying it to bolt onto regular SBC heads for $100.
Im wanting 147.50 + shipping

http://i7.ebayimg.com/04/i/05/3e/51/6b_1.JPG

hopefully that link will work for a picture

I have this posted on thirdgen.org as well.

Im hoping that posting this is ok. If not ill delete it or im sure one of the mods will.

How do you modify it anyway to fit other heads and a distributor?

If your looking at the side of the manifold there are 4 bolt holes. The two outside holes line up. The inside 2 have to be drilled and tapped on both sides. And depending on the year of the heads(pre 87 or not) will determine whether or not you drill at an angle or straight down. The other thing that has to happen is putting in the coolant ports. if you go to www.lt1intake.com (http://www.lt1intake.com) and then go to the freq ask questions section then go to the question that asks whether you can do if yourself and there is a link that gives the whole process in very great detail with pictures, part numbers and everything.

anybody have any interest? Any offers?

anybody have any interest? Any offers?


im thinking about it, if i would get it, i would send it to the lt1intake guy to get it modified. I dont want to spend the big bucks on a miniram or something similar. I'll let you know though. are you in a rush to get rid of it?

Not a huge rush, but ya know, id like to get rid of it sometime soon.

mostly i just need the money to pay a guy for a spohn adjustable torque arm and cross member that im getting from him.

Heres some more pics
http://i31.photobucket.com/albums/c364/92zcamaroperson/f7ee7777.jpg

http://i31.photobucket.com/albums/c364/92zcamaroperson/0310b6be.jpg

http://i31.photobucket.com/albums/c364/92zcamaroperson/9a6b9540.jpg

Hey AFI do you want it still want it. A guy says he can get me the money thursday. Lemme know.

i might be interested... how much better is this then the TPI? and can i use my tpi parts to make it a complete setup? and where are you located?

Im in Orlando, Florida. Shipping to you should be cheap. Check out www.lt1intake.com (http://www.lt1intake.com/) under the Q&A for specifics on what all you need to do the swap. LT1 manifolds breath alot better in the high end and can boost overall hp and probably even out your torque curve. I dont know how it would react with your 400 motor but I guess the same as any other sbc, but I dont know much at all about the specifics on 400's. The manifold still needs to be modified to bolt to regular sbc heads which the guy will do for around $100.
Like i posted before another guy wants it and says he can get me the money thursday. I need a firm response or its first with the money gets it. So just lemme know asap :)

heres the direct link for the detail on the modification process start to finish.
http://www.lt1intake.com/files/swapping.htm

soooo......yay or nay?

sorry but i dont have the money for it....wish i had money to spare but im already not eating lunch at school to pay for my gas... yeah im looking for a job.

hey man i understand. Good luck on the job search.

do you still have the intake and where are you located, I'am in Orlando