i have a 94 geo prizm i replaced both headlights but the haynes manual is differant than what i have how do you adjust the headlight ... help

You may have already seen this whereas I just posted it yesterday:

11-24-2005, 08:47 PM, treywink, For 1998 and later there are two screws for adjustment which is usual, however they are behind the light housing which requires some disassembly (earlier models are pretty similar), whereas you were probably looking to see them above or below and to one side. Pull the bulb housing forward after removing the screws and the adjustment screws will be visible. If you are not familiar with what I am describing, I suggest you buy a Haynes repair book for about $15. It will help you with many other repairs and basic maintenance.

By the way, Haynes gives some basic considerations on actually aiming the beam patterns.