|
|
Disable alarmBarefooter 11-16-2005, 10:27 PM I have a 97 JGC and wanted to disable the alarm without going to the dealer. I could not find anything that worked for me on this forum. I kept at it until I figured it out on my own. Thought I would post, so I could possibly save someone else the frustration. I am not certain this is the correct way to do it but it worked for me. Push the unlock button on the remote and push the button under the dash (backside of the plastic piece where the computer diagnostic port is located) simutaneously. The alarm will chirp twice and that's it. Hopefully it will work for you too. jeepfixitman 11-17-2005, 03:40 PM I have a 97 JGC and wanted to disable the alarm without going to the dealer. I could not find anything that worked for me on this forum. I kept at it until I figured it out on my own. Thought I would post, so I could possibly save someone else the frustration. I am not certain this is the correct way to do it but it worked for me. Push the unlock button on the remote and push the button under the dash (backside of the plastic piece where the computer diagnostic port is located) simutaneously. The alarm will chirp twice and that's it. Hopefully it will work for you too. there is no button there from the factory Barefooter 11-19-2005, 02:10 PM there is no button there from the factory Sorry I haven't gotten back to you but we just had our first grandchild! Anyway, I believe I do have a factory alarm system and the button was very difficult to find. The button is just under the floor interior light bulb. If you reach behind the plastic, where the port is, then feel for the button. It is difficult to see because the button and everything around it is black. You will be able to find it easier by feeling for it than by sight. crzfrog 11-21-2005, 09:20 AM Sorry I haven't gotten back to you but we just had our first grandchild! Anyway, I believe I do have a factory alarm system and the button was very difficult to find. The button is just under the floor interior light bulb. If you reach behind the plastic, where the port is, then feel for the button. It is difficult to see because the button and everything around it is black. You will be able to find it easier by feeling for it than by sight. can it be done without remote don't have Barefooter 11-22-2005, 12:51 AM can it be done without remote don't have I'm sorry but I don't know how to do it without a remote. You may try the key in the door and pushing the button simutaneously, maybe that would work. Of course, you would need somebody to help you though. Good luck! the_demi 01-02-2006, 06:09 PM Is disabling the alarm the same as cutting out the immopbiliser?? My jeep is sitting with the immobiliser NOT reacting to anything we try. vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|