Does anyone know how to install? Do you have to get differnet belts? I was looking at a OBX Underdrive Crank Pulley off ebay.

Does anyone know how to install?Click the link for a how to get your stock pulley off. Once you have it off, you heat the UDP in the oven for like 20 minutes at 400°F
http://forums.neons.org/viewtopic.php?t=121498

Do you have to get differnet belts?Yes, you will need different belts, as now the diameter is smaller.

I was looking at a OBX Underdrive Crank Pulley off ebay.I haven't heard anything bad about that pulley. I know a few people running it now for about 35,000 miles with no problems.

Click the link for a how to get your stock pulley off. Once you have it off, you heat the UDP in the oven for like 20 minutes at 400°F
http://forums.neons.org/viewtopic.php?t=121498

Yes, you will need different belts, as now the diameter is smaller.

I haven't heard anything bad about that pulley. I know a few people running it now for about 35,000 miles with no problems.
I got it kinda on but I cant get it all the way on do you know how I can heres what the pulley looks like http://www.modernperformance.com/dcx/mpx_pulleys.jpg
We cant get the pulley on anymore without the damn thing spinning got any ideas?

We cant get the pulley on anymore without the damn thing spinning got any ideas?The pulley is spinning? If so, just stick a crowbar or breaker bar through it to keep it from spinning. Thats what I did.

The pulley is spinning? If so, just stick a crowbar or breaker bar through it to keep it from spinning. Thats what I did.
where do I put it at??

where do I put it at??Nevermind that, I was thinking of the stock pulley! You may have to pull it back off and reheat it, or you could try banging it on there, although I don't recommend this way!

Nevermind that, I was thinking of the stock pulley! You may have to pull it back off and reheat it, or you could try banging it on there, although I don't recommend this way!
well the damn thing is stuck on there I got off the bolt and cant get it off I got a pulley puller but the bolt is to big I grinded it down but I need to grind on it some more to get it to fit