Sorry to keep bugging you guy's but my 2002 24 valve only runs ruff at idle and when full acceleration. AutoZones codes read missfire on 1 and 3 cyl.

Trying to learn all I can so I can stop bugging all you helpfull folks !!
Rob Roy

Sorry to keep bugging you guy's but my 2002 24 valve only runs ruff at idle and when full acceleration. AutoZones codes read missfire on 1 and 3 cyl.

Trying to learn all I can so I can stop bugging all you helpfull folks !!
Rob Roy

Next step is to check the conditions of plugs 1 & 3.

Pete

Sorry to keep bugging you guy's but my 2002 24 valve only runs ruff at idle and when full acceleration. AutoZones codes read missfire on 1 and 3 cyl.

Trying to learn all I can so I can stop bugging all you helpfull folks !!
Rob Roy
just replace the plugs in those cylinders to see if it helps.ive seen normal looking plugs causing misfires before

I have spent hours on the internet trying to find info on the fireing order AND which side of the engine (front 3 or back 3) spark plugs are for cylinders number 1 and 3. on my 2002 24 valve engine.
Boy, I sure hope I find a Haynes manuel soon for this car so I can stop bugging all you guys with these basic questions.
Thanks again for all responces and help !!!
Rob Roy

The firing order for the 2002 Taurus with 4-valve per cylinder 3.0 liter V-6 is 1-4-2-5-3-6.

I believe that cylinder #1 will be the cylinder nearest the firewall at the belt end of the engine (left rear as looking at the engine from in front of the car). I'm not positive on that. If your car has the original plug wires, the wires are probably labeled for the cylinder they go to.

-Rod

Here is a link to All data DIY repair info online sub.
It covers everything on your car. 24.95$ a year but it is better than 10 haynes manuals. And you can get it in 10 minutes. Has all recalls and tsb and all repair info.
http://www.alldata.com/products/diy/index.html
MT-2500