|
|
Interchange steering col.Jonn 11-01-2005, 07:06 AM Got a bad steering column in a 91 Lumina, anyone know what years will work? or what other GM's might have the same column? Problem is mine is column mounted shift, and all i can find in yards around here are floor shift, thanks maxwedge 11-01-2005, 10:14 AM 90-94 should be the same, but the Hollander exchange book used in salvage yard has that info. Schurkey 11-01-2005, 10:27 AM Just a few days ago I stuffed a '90 column into a '92. Easier job than I expected, by the way. This was a floor-shift car, only goofy parts were: 1. disconnecting the shift inhibitor cable at the ignition switch--there's a tiny hole and you have to jam a tiny screwdriver into it to release the cable clip. 2. Spreading the clamp at the intermediate shaft. You pull the retainer bolt, then wedge a screwdriver into the split in the coupler to open it up some. PITA. jeffcoslacker 11-01-2005, 03:54 PM I'd put floor shift in if it was mine....good time to do it. Jonn 11-01-2005, 06:46 PM I'd put floor shift in if it was mine....good time to do it. Cant use a floor shift, my car has twin elec seats but they are tight together in between them. no console. jeffcoslacker 11-02-2005, 08:16 AM Cant use a floor shift, my car has twin elec seats but they are tight together in between them. no console. Get some seats and a console while you're at the boneyard....c'mon, do I have to do it for ya'?:lol: Jonn 11-02-2005, 05:48 PM Get some seats and a console while you're at the boneyard....c'mon, do I have to do it for ya'?:lol: Hey, ya wanna do it? :) no, i am not putting that much in this old thing, 204k on it. It only has to last till spring when i have the V6Z finished. This Lumi is the 2.5 4 banger. The Z24 is getting a rebuilt 3.1 the lumi will stay around as a emergency ride vBulletin®, Copyright ©2009, Jelsoft Enterprises Ltd.
Automotive Network, Inc., Copyright ©2009
|