Sub and amp help...
pi3yeargrad
10-27-2005, 11:02 PM
sub and amp help...
--------------------------------------------------------------------------------
On, heres the deal...my system sounds great...thumps hard and is very clear...
I want more though and Im wondering if anyone can help me rewire or bridge amp or SOMETHING to get as much power as I can out of the amp and get as much bump out of the sub...
I have a Sony X-plode MOBILE ES class D model number: XM-6001GXD
1000 watt mono-amp.
Im running a AUDIOBAHN AW1200Q 12" 700 watts RMS.
info on sub is:
700 Watts RMS
120oz. Magnet
Sold Individually
Dual 4 Ohm Voice Coils
2" Phat Foam Surround
Huge Double Stacked Magnets
Non-Pressed Non-Transfer Paper Cone
KM3 Coating For No Distortion
2/8 Ohm operation
info on amp is:
MOSFET power supply and output stage
Class D circuitry
300 watts x 1 at 4 ohms
600 watts x 1 at 2 ohms
1-ohm stable
50-300 Hz low-pass filter, 18 dB/octave
0-10 dB bass boost at 40 Hz
0°-180° Phase Shift Adjustment
speaker-level inputs
gold-plated connectors
4-way protection circuitry
14-1/8"W x 2"H x 10-1/2"D
Can someone help me out please. Someone educated on this subject...I hear there are many engineers in this forum...help me out
--------------------------------------------------------------------------------
On, heres the deal...my system sounds great...thumps hard and is very clear...
I want more though and Im wondering if anyone can help me rewire or bridge amp or SOMETHING to get as much power as I can out of the amp and get as much bump out of the sub...
I have a Sony X-plode MOBILE ES class D model number: XM-6001GXD
1000 watt mono-amp.
Im running a AUDIOBAHN AW1200Q 12" 700 watts RMS.
info on sub is:
700 Watts RMS
120oz. Magnet
Sold Individually
Dual 4 Ohm Voice Coils
2" Phat Foam Surround
Huge Double Stacked Magnets
Non-Pressed Non-Transfer Paper Cone
KM3 Coating For No Distortion
2/8 Ohm operation
info on amp is:
MOSFET power supply and output stage
Class D circuitry
300 watts x 1 at 4 ohms
600 watts x 1 at 2 ohms
1-ohm stable
50-300 Hz low-pass filter, 18 dB/octave
0-10 dB bass boost at 40 Hz
0°-180° Phase Shift Adjustment
speaker-level inputs
gold-plated connectors
4-way protection circuitry
14-1/8"W x 2"H x 10-1/2"D
Can someone help me out please. Someone educated on this subject...I hear there are many engineers in this forum...help me out
GForce957
10-27-2005, 11:11 PM
Theres an audio section that you should post this in
pi3yeargrad
10-27-2005, 11:13 PM
Sorry, Im new here....u think someone will still help?...this is my first post here...
GForce957
10-27-2005, 11:16 PM
I dunno, but you will have alot more luck there.
Go to cars in general, then car audio
Good luck
Go to cars in general, then car audio
Good luck
Automotive Network, Inc., Copyright ©2024