Thanks for all the sugestions, my no start is cured after a new crank and cam sensor I finally found the problem.....The wiring to the cam sensor BEHIND the power steering pump was chaffed and oil damaged At first I thought that this is all I would find .......but the same 3 wires futher down closer the the cam sensor were also damaged......I removed the complete engine wire harness and checked the complete assembly for damage the rest of it checked out okay so I retaped and reconduit all of it..........Anyways bottom line the car started right up......So keep those wires behind the P/S pump in mine......anyways I am about to start a new thread I bought a 96 P/A Ultra with a noisey Super charger.....Old school of hard knocks